开云体育

Hi Rahul, what OS version is running on the SX80 codec? This will make a difference Jim

Looks to me like your program never compiled properly. I've had this happen occasionally on my Parallels VM. Usually moving the complete program to a known working folder (where a program is known to

Spectrum receivers… nothing like needing to have a backlit reboot button on the front panel. Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer | DMC-D-4K |

They are most likely the same as the Scientific Atlanta commands we've all been using for years. You may have issues with repeats on some commands; that seems to be the only problem I have run into

Dear All, Can anybody let me know how do I Control DMPS3-200-C with Cisco SX80(with Touch 10), I had already prepared the GUI using Cisco In Room editor and loaded the GUI in cisco Touch 10.

Has anybody worked with the Spectrum 110-A? I've got an upcoming job where I was told these are the boxes we need to control, but I don't have anything to put my hands on at this point. It looks like

Thanks Williamprice880, appreciated. Cheers Rich

I have an upcoming job where I need to control a Hyperwall from a Crestron system. I need to turn the power On, Off and recall three presets. I am looking for any help on how to get this to work. I

Take a look at the chr reserved word. String = chr(integer) That should get you where you need to be.

Ok… so a couple points: 1. ITOHEX outputs the asciified hex equivalent, e.g. as a string with the hex representation. If you want to send it as a hex byte CHR() or the %c modifier in MAKESTRING will

Hi All, I'm new to S+ and I'm trying to append a hex checksum to a string. The weird thing I'm seeing is that when I send a decimal value into my checksum logic it appends it but the ITOHEX will

I am hoping someone can help me. My gut is telling me my SD Card is beginning to go on a MC3, but the odd thing is I can load previous versions of my program and write them successfully to the

This should get you started - https://learnavprogramming.com/product/s-intro-course-free/ https://learnavprogramming.com/product/s-intro-course-free/

Hi everyone Does anyone have a module that can control this device? I was using the one in the application market but they have changed the ports to udp 30303 and the olde one is 9761 and theres no

Depends on what you mean by ‘send’. If it’s something synchronous or an async driven from the S+ side you can use a public string (or the return value from a function) to get ‘read’ S# data

I am using the SendmailSharp_r1 and can not get it to work with Gmail. I have 2 step Authentication password in the pass word and smtp.gmail.com and my email and a user name. I still get a error. What

take a look at controlanything(dot)com

Hi all, Recently embarked on the simpl# journey and there are a few things that I'm struggling with. The main one at the moment is how to send a string from simpl# to simpl+. Can anyone out there help

Yes I am, thanks for clarifying.

Lol