开云体育

I have this working using an IRUSB transceiver from Video Storm -http://www.video-storm.com/proddetail.asp?prod=irusb on an nVidia Shield Android TV box. It should work for other Android TV boxes as

view port or toolbox? Sounds like the power supply, I would call Crestron Tech Support

1 command = 1 level change. If the device supported a press and hold function, it would normally have separate button "pressed" and button "released" commands. Without separate commands, the device

Should be . . . depends on the brand, I suppose. From: <Crestron@...> on behalf of "Stefan Andersson stefan@... [Crestron]" <Crestron@...> Reply-To:

Has anyone controlled a Newline TRUTOUCH X5? More specifically, the volume control. The RS232 commands are in the manual, so easy enough there. I'm just wondering if a press and hold will raise/lower

Hi, Is it possible to control Android TV via IP or is it only IR/CEC for sat boxes? //S

"The Stop command is sent 1 second after the preset save or recall" Perfect - thanks again so much! - Chip ---In Crestron@..., <adamsx2@...> wrote : You have to send the "Stop" command

Can anyone who has updated from V1.0 to V2.0 tell me if the pairing needs doing again after updating the module from the Crestron side, or whether just updating the program to the new module and

Using a serial I/O and a TCP/IP Client tied to the IP of the roku device. For Keypresses: POST\x20/keypress/Home The following are the key names that are recognized by ECP: Home Rev Fwd Play Select

Recently tried updating Pac 2 so we could add some newer crestron app, the upgrade failed and it just keeps restarting, tried using alt-K from within viewport to no avail. everything is unplugged and

You have to send the "Stop" command before you send another command, such as a preset save or recall in order for it to save the preset properly if you are using multiple presets. It simply tells the

In Simpl+ review makestring.

i'll check the sleep settings again to be sure mark

"I need help to write a module" The EASY way to do that would be in S+. Is that what you'd be interested in, or did you need/want to have it done in SIMPL? - Chip

Hi Rk Can you send me the Roku IP Control Command...

I need some help with some a very simple project. I need help to write a module that has 20 inputs 60 outputs where the command code is: [Input]V[Output]. and to do a single input to multiple outputs

"I also had to send a "Stop" command after the preset "Save" or "Recall"" Okay, first of all, thank you *SO* much! Second - I'm almost scared to ask - what does the STOP after each save or recall

How did you go about getting those from TBTS? I just talked to them they acted like I was crazy. Did you have to talk to someone specific? Maybe one of the days I will learn the secret handshake

Can anyone help me with a simpl or simpl + module to control/interrogate a new alarm panel I am co developing in the UK please ? I have the protocol document but due to the NDA and other legalities

Actually yes, I used the SRG-300SE IP v1.0 module, but I did have to do preset save/recall using an SIO and I also had to send a "Stop" command after the preset "Save" or "Recall" Ex: Preset 1 Save