开云体育

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /IR Drivers/Toshiba TF-50A810U19.ir Uploaded by : metdeathx

Hey Crestronfreak55! Thanks for your response. File is loaded to Documents section of Files. I ended up working through a workaround to get good old reliable RS232 to the displays with the system's

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Documents/webOS_SNMP_Command_UserGuide_V1.6.pdf Uploaded by :

I saw it with a Pac2 that somehow jumped into slave mode while I was setting up cresnet ids for keypads. Once I took it back out of slave mode it was fine again

I saw this recently with a PMC3 on the cresnet (thermostat) showed as null. I rebooted, reloaded firmware, and then swapped for a MC3 I bought off of ebay (buddy's house).

I recently purchased 2 new in box DMC-CO-HD-PA 8G+ output cards for a home project only to find out upon receiving that neither came with faceplates. Various search attempts have failed to turn up

I’ve seen it happen with an ancient device that didn’t report precisely as Toolbox expected it (iirc, it was a CNECI-4 or CNECI-4a where Toolbox was expecting it to report CNECI-4A If you

Does anyone know why I am getting a Null folder on my network device tree view? Cresnet devices are reporting fine, but non of the ethernet devices are reporting. However, the processor is connected

couple of questions- does this work with Sonos 9.0 firmware? if the zone is in a group will it pull out of the group? What is the MAC address format? TIA Chap Cory

Hellow every one I downloaded the Heos Denon module because I want to integrate a Heos Likn and Heos Amp for a client but I'm not sure if the module that is in the crestron market works, I tried to

This probably doesn't answer your question, but just in case anyone is wondering, the DM-NVX-350/1 does not support VLANs, tagging, and etc. I myself was hoping to use the built in LAN port on a pair

Well I tried to get version number off of switch, but power was off at the jobsite all day. I will try again next week (I'll be back there on Monday). I did have a brief chance to look at the

You will want to set an IP on the switch as it needs a valid IP address for the querier to work properly. Other than that the IGMP is already available.

Just a shot in the dark, but does anyone have a module to control a JVC KY-PZ100 IP Camera? I could really use some help controlling this one as I'm a little daunted by the API that I've found online.

Anyone know for sure if this module works for audio only calls?

What Slip and Phil said: +1 Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K ControlWorks Consulting, LLC | Crestron Services Provider |

Haven't had any experience with the Color Kinetics iPlayer3. The OFF command in the serial driver actually works as a toggle power command. The module in the Application Market is the one I am using

What Phil said: +1

What I would do in this case is have 1 subpage for the mic button, apply it multiple times to the page, and use subpage offsets to differentiate each position. Crestron@...> wrote:

Having an issue with a project loaded to a DM-DGE-200-C. Customer is expecting an aerial view map of a 400 seat auditorium, each seating having a microphone, with an indicator for the mic state at