开云体育

Just do it. Make sure you get all your combined scenarios before you start. Get it from the customer, not the engineer. I've been told by engineers one thing with 5 rooms that had like 7 different

Searched Conference center and found this thread. Had no idea it would be this old but here goes. Neil, Lincoln, Chip, I figure you're top on the div-space list code gurus, but anyone with experience

I know this thread is old, but BSS BLU works great with 3 series. I was only looking at this because I was searching RANE HAL and trying to find anything related that anyone can share as far as

Check the files section. I thought I posted when this initially came up.

If I could bend your ear for a couple minutes that would be wonderful. Especially if you programmed for Home Automator . . . kol -at- cox.net

In my download, Provider Sample 1 was cable, Provider sample 2 has only about 18 channels in it.

Isn't it one of the providers that come with the download?

Has anyone had any luck streaming an HDHomeRun from Silicondust into a smart graphics Embedded Video Object? I can see the stream at http://192.168.1.140:5004/auto/v8.1 in VLC and it shows the stream

Did anyone ever end up making Directv files they'd be willing to post?

So you got Simpl and VTPro to run in Linux?

Thanks for all the suggestions. It turns out to have been a dying old Squeezebox on one of the inputs via a Kramer switch. It looks as if it was working properly but when I disconnected it from the

I think Siedle (http://www.siedleusa.com/index.php/products) makes the Mobotix SIP door camera. Jayson From: <Crestron@...> on behalf of "ripper99@... [Crestron]"

I'm not that familiar with the SWAMP, but have you checked if there is an option, either with toolbox or on the SIMPL symbol, to disable the amp power off? Seems to me this should be optional behavior

Very important rule to follow...Don't do anything remotely with a processor without at least one of the following two things put in place: 1- Have someone on site to immediately deal with a locked up

Hi Ross, thanks for the suggestion and this might work but I have no unused zones and I think if I implemented something like that the feedback is gonna show a zone as always being on the way most

You can do this with Mobotix cameras and the Mobotix app however I am not so sure about integration with the Crestron app, I know some programmers were able to get a TPMC-4SM-FD working with the

Can you keep an unused zone on 24:7 at 0 volume?

I just tested this the past hour and my doorbell is working again but *only* if I add a 4.5 second delay before my Play Doorbell sequence, if I don't do this and all zones are OFF then I never hear

I tested this again, the CEN-TIA is connected to Cresnet and not Ethernet and works fine but I believe the problem has to possibly do with the new firmware turning off the amp *power* when all zones

I have a client who wants to put a camera in the kids playroom, and be able to view and talk TWO WAY to the kids in that room via Crestron App. There are no speakers in the room. I was thinking a SIP