开云体育

i have a clsi-c6 (ilux) installed in one of our projects and the client experiences random ALL ON coming from the iLux. i've checked the program and can't figure out what causes the problem. any

The customer lost his remote, thanks!

In Toolbox enter the procesor’s IP address and then in the controlsubnet hostname field enter the hostname configured on the device you’re trying to reach. Isolation mode must be off for this

I suspect you're looking at the wrong version... there are two "non-Crestron" versions (Zigbee and Z-Wave) out there... I toyed with the idea of picking up the Zigbee version of the lock, suspecting

There were no quotes on the name originally but changing the name to something simpler resolved the issue. Thanks Jeremy and all who contributed -- Sebastian Marszalek

Bringing up this topic again... If I want to use one of these Yale locks, do I NEED to get it from Crestron, or can I get one from another vendor? Theyre double the price from Crestron. If so is there

?Hi Guys, I have a pro3 with Lan port configured with VPN access where all my biamp and amx switchers are residing. I can hit all the stuff on lan port by vpn access but can't seem to hit any touch

There is no released IP control. Why do you need to control it IP? IR control works perfect, and all QIP boxes use the same codes. If you don't want to put an emitter on the front, they support a rear

Are you sure on the CEC? Cause we have been using CEC (power on/off) with Samsung tvs for 2 years now with no issues, including brand new 8000 series models.

We have it in a number of installs (including my personal system) and it has been working fine since we made the fix posted above back in june. No problems. What issues were you having? I also noticed

Yeah...definitely check the cable/terminations - what kind are you using? (e.g. actual DM cable; shielded/unshielded Cat7a, 6, 5E). Also, are there any large but intermittent EMI sources in the area

Both. Right now i'm running a new MBPr for everything, but my next laptop will likely be more along the lines of a MacBook Air or some other ultra book paired up with a custom PC setup to triple boot

Sorry,? 100-c

Here is the error: Error: splusmanagerapp.exe # 18:03:21 2-26-2014 # SplusManager: Unable to send Module data back to the Logic Engine. Error Timeout for e_SIGNAL_TYPE_DIGITAL have an analog on as

Can't test right now, but could it be you have to set "Use project settings" on the subpages in VTPro?

Have you isolated it to just that input card or output card? You said you swapped out the RMC as well as the cable box but have you tried going into a different input on the DM? Pat

I've researched this in the past and came to the conclusion that it wasn't possible without a hacked Powerlink module. If there's any new developments please let me know!

Hi guys, I have a project with an MC3 and a third party HDMI matrix that has IR passthrough with mono jacks. Don't really want to hook up the Crestron transmitter with the matrix' receiver, does

If you are a dealer you can contact them at 210.348.6565 x1. Also Dobbs Stanford tommy@... User Manual. It is so easy to control (simple ASCII commands similar to Extron) and can detect

Hi Yes I am. Still researching at this time, but struggling at the moment :(