开云体育

Yeah...definitely check the cable/terminations - what kind are you using? (e.g. actual DM cable; shielded/unshielded Cat7a, 6, 5E). Also, are there any large but intermittent EMI sources in the area

Both. Right now i'm running a new MBPr for everything, but my next laptop will likely be more along the lines of a MacBook Air or some other ultra book paired up with a custom PC setup to triple boot

Sorry,? 100-c

Here is the error: Error: splusmanagerapp.exe # 18:03:21 2-26-2014 # SplusManager: Unable to send Module data back to the Logic Engine. Error Timeout for e_SIGNAL_TYPE_DIGITAL have an analog on as

Can't test right now, but could it be you have to set "Use project settings" on the subpages in VTPro?

Have you isolated it to just that input card or output card? You said you swapped out the RMC as well as the cable box but have you tried going into a different input on the DM? Pat

I've researched this in the past and came to the conclusion that it wasn't possible without a hacked Powerlink module. If there's any new developments please let me know!

Hi guys, I have a project with an MC3 and a third party HDMI matrix that has IR passthrough with mono jacks. Don't really want to hook up the Crestron transmitter with the matrix' receiver, does

If you are a dealer you can contact them at 210.348.6565 x1. Also Dobbs Stanford tommy@... User Manual. It is so easy to control (simple ASCII commands similar to Extron) and can detect

Hi Yes I am. Still researching at this time, but struggling at the moment :(

Has anyone had experience with this unit from Intellix. It looks like I can get this for ~$2200 with 4 receivers. http://www.intelix.com/intlx_prod_details.php?pitem=DIGI-44B

Thank you for the information on the Zigen product. It appears to be a bit out of the range the non-profit can afford. :(

Mike S, Thank you for the information on Tekvox!! Where do you buy Tekvox from? I have not been able to track down pricing? Bryan

Studio Minimum requirements is a 2.0 GHz processor with 4GB RAM but recommends a Core i7 with minimum 8GB RAM. I;m running a Core i5 @ 2.6 GHZ with 16GB RAM (WIN 7 ENT SP1) and still experiencing the

100, 100-C, 100-S? Which flavor of DM? -- Lincoln King-Cliby, CTS Commercial Market Director Sr. Systems Architect | Crestron Certified Master Programmer (Silver) ControlWorks Consulting, LLC Crestron

Try using a simpler project name, like one without quotes in it. s.marszalek11@...> wrote: -- Jeremy Weatherford

not sure about the RMC report back, last time I was on site it was late and couldn't get it to fail in the hr and a half I was there. in regard to one location yes, however recently their was one

thanks Lincoln, we are using a DM-RMC-100, not sure about the cable being certified, I will have to check, but we did replace it to rule that out and we are still experiencing the inconsistent drop

I also see this in the error log. System log: 1. Notice: Update request from Slot-05.IP-ID-07 TimeStamp: 15:01:04 2-26-14 UpTime: 0 days 00:27:22.27 Task: XMLRx07 2. Error:

This is the exact message I get on the S4, I am trying to use local file. near"s_20Phone_20v4": syntax error (code1):,while compiling: SELECT system _id, file_path From display_list_files WHERE