开云体育

Thus the "This is for a NYC install, if that matters" :D

What I wound up doing was adding a little bit of logic to my SWAMP module. If the SWAMP's mute feedback isn't in line with what the program thinks it should be, then it quickly puts it back. Now when

That's kind of vague... Like asking for a battery for your "Verizon Cell phone" ;) Depending on the specific TW region and what platform the headend or hub was built using that you're in you may find

Anybody have a good one they can share? Do all Time Warner boxes use the same IR? This is for a NYC install, if that matters.

If not difficult give any reference (link) to the protocol, etc. Thank you.

hmmm...

Haven't the paths changed from, e.g. \\cf0\\ to \\rm\\ \\rm1\\ etc.? Lincoln -- Lincoln King-Cliby, CTS Commercial Market Director Sr. Systems Architect

there is a module for integra in crestron database in SIMPL WINDOWS, it`s called TCP/IP in the end. tested to work:) ASD

Doing a project now. It works fine for me. It is the same code set i.e. "on" for power on, "off now" for power off. (without the quotes) It didn't take anything special so I'd check your wiring.

Never tried through the dock, but the cable for URC and ML-600 will not work. I am pretty sure that tx and rx are reversed. http://www.remotecentral.com/pronto/pfaq-b3.htm _____ From:

Yes, I know. Now rewrite the S+ module with long strings (from the crestron.com). (

Checking my bases on this. I'm having an issue with a module on a 3-series processor that works on a 2-series. All I've done to the simpl+ module is set the target to 3-series, and get rid of the s>

Based on my experience, you're going to run into issues with this module whenever the IP connection between Processor and AVR is broken unexpectedly (processor reboot/reload, router reset, power loss,

Have any of you had any luck with controlling the Smart UX80 projector? It appears to have the same code basically as the UX60 - but so far no joy. Thanks, Paul

Hello All, Just wanted to post a quick note on the Pioneer VSX-1022. I was having trouble getting IP control of this unit working correctly. After some time working on it, I think everything is

There is an Interga TCP/IP module on Crestron's website. I haven't tried it on an Onkyo but it does use the long strings.

I am looking for an IR driver for the "Vidyo" 110/220 videoconferencing room systems. Thanks

Ah. Thread format fail. Gotcha. - Chip

Yup, a few threads behind! Sending modified files only should be coming soon, I hope!

Eric was responding the thread question, which wasn't about FTP (even if it is faster!)