开云体育

So I put the scaling into the simpl+ module. Tested and still sent command out issuing a change on init. I then commented out the Abuf feeding the module and no command sent at init.... It seems to be

IPv86.... Due out 3012... :D

Shorter folder names. Sorry man - that's all I got. :( - Chip

You're either not running the current version or you need to share your secret. The current version laughs at me when I try to open Outlook, Firefox, SIMPL Windows, VTPro...whatever - it's ALL hidden

That's not wrong - that's just the IPv86 format of the address. Damn Crestron trying to get ahead of the curve again. - Chip

The interface I made to Weatherbug is still rocking, no hiccups in nearly three years. I'm sure others work too, and I'm using the Core3 weather app on Xpanels, but use this for other purposes:

Wait, the splash is only displayed for 2-3 seconds, or it takes 2-3 seconds after launching Toolbox for the splash to be displayed? On a good day I might be in the latter; I can't fathom the former.

2 - 3 seconds?!?!? Can I have *your* laptop??? - Chip

Thanks Geoff, that actually makes quite a bit of sense. Thank you.

The Crestron module is pretty awesome. It's really simple, just double check your work. Make sure your DNS servers are working on your processor and check your gateway. Because it works really well.

Try the Nuvo tuners. I haven't done one in a while, but was quite happy with the ones that I did.

Um, no - that's not what they're talking about (at least not beyond the first post). Some RS-232 protocols have a command that simply takes a number as the parameter and the number is mapped to a

I'm having that issue (along with double pressing). This one is run off of a DM RMC-100. Same IR file is working perfectly off of the CP3. Tony, any chance you could post the IR?

Haven't tried, as I also use the VM for other things - Litetouch, Vantage, etc. If I ever get really bored, I might try it.

I think it does...The actual recordings are almost perfect...a few digital hiccups every once in a while(could be the SD Card I use for testing), servers for storage have been good also. ?The only

The Crestron instructor used this page at the cert class. www.rssweather.com

Isn't that what this is talking about here? http://www.remotecentral.com/cgi-bin/mboard/prontopro/thread.cgi?2911 I just thought someone had created a tool to "integrate" this automatically.

Any one got a good weather module with a forecast and some graphic feedback such as images to show conditions.. Weather channel stopped the feed and i cant get a connection using Crestrons Module.

Does anyone happen to remember roughly what were the power requirements for the VT-4000L? The manual on the ftp doesn't actually say. The VT-3500 was 24W, so I'm guessing it'll be somewhere higher

Diverging: Chris, have you tried two vs. four cores in Fusion? I'm curious. In the past I always found two to be faster than four, but I'll try again if something has changed.