开云体育

The biamp modules from crestron are in general difficult. I found easier to simply make my own. The protocol is simple. You will have 100 percent reliability and clean feedback. Done this with up to

I don't know about the 7.2 modules, but the Command Processor other versions (including 5 and at least some in the 7.x chain) have really bad queue management, in that there is no timeout on a

It shows 192.168.0.3 (its static ip address) This is IP good because I use this address for html hosting and I just connected through the toolbox a second ago just to double check.

Subject line says it all. I have to revisit a job tomorrow where we have Biamp controlled serially (7.2 vintage modules). This was a new install last year. After some months of it being in operation,

On the TCP Server configuration (in the device tree list, select the server and press F6, or right click), what do you have for an IP address listed?

I'm working on getting away from the activex control for remote control so I created a TCP/IP server using simpl. I tried to using putty and open the port, but it would not open. I have uploaded an

We had this issue with a Pro2 and CP2E and we worked with Crestron engineers who said it was a firmware bug. They sent us a beta firmware that took care of the issue. Contact TB.

DSI Entertainment Systems is looking for a full time Control Systems Programmer. Programmer should be comfortable with commercial, residential, and lighting programming. Benefits include a competitive

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Documents/Sony XBR55HX929 RS232 Protocol Manuals.zip Uploaded

I used the Media Player object for the first time last month, with several TSW panels, a couple of DGE-2's, and an X-Panel. We used it with an IDOC and CEN-TRACK (AM, FM, XM, and AUDIONET). Some of

Submitted it to TBTS

Looks like I spoke a little too soon. After opening a project, it is adding those entries back in.

See this with Win7 also, will give this a go. Thanks! Tray Sent: Monday, May 13, 2013 10:56 AM To: Crestron@... Subject: [Crestron] There was a problem sending the command to the program.

I was getting the "There was a problem sending the command to the program." error on both of my Windows 8 PCs when trying to open a .vtp file by double clicking on it. Very annoying. There are similar

Current firmware causes EISC issues with certain network switches. I think I had to roll everything back to 4.003.xxx to fix it.

RV Express has a Help Message and Help Response Text Field...

It works okay with iDoc, haven't used it with Audionet, and I've had bad luck with it on TRACK AM/FM/XM. One thing I've found on a couple of systems now is that when using it with the iDoc, it screws

Here's another method, to beat a horse to death. :) LAMP = (BYTE(rx$,3) << 8) + BYTE(rx$,2);

I had a problem between an MC3 and a PAC2. Some thing: offline/unknown. Besides getting all of the FW up to date, I think what may have fixed it for us was wiping out the IP table in the MC3 program

That's a bit strong of a statement. Roomview isn't exactly a task that requires programming skill. It's something you have to figure out, but it's no different that being presented with a strange