开云体育

Also. If you have a program specified as slot 1 and another specified as slot 1 on RM it will boot the RM program first (then RM2 if you have a second USB drive) then internal memory. -Neil Dorin

Pretty much. Except you can have several programs (all 10 if you wanted) run of RM. make sure when loading from toolbox you select the slot and compact flash as the destination. -Neil Dorin

I forgot about that... such a bad design...

Haven't tried it on 3-series yet, sorry.

Is this where multiple programs in a 3-series would be beneficial? Does a ping lock up the program, or the processor? Could you dedicate a program just to tracking IPs once every 15 seconds, then EISC

Yes. I had to reverse engineer it but I am running a 4x4 video wall that can switch between being a fullscreen video wall and 4 individual monitors. If you take Samsung's control software and run it

you have to go through and parse for xml characters and replace them with ascii. i started doing this a few weeks back and got bored of it after about 10 or so characters. there's dozens. totally

Hi Not sure if there is expand API for samsung video wall I am now developing the module for Samsung MD, ME, DE, UE and UX series video wall. Checked the API in their manual they should use the same

My Sharp LC-52D82U does it as did many Sharp consumer displays and a few Sony's. That's how I run my gen 1 xBox 360 at 1080p. -Neil

We have been mounting cheap HDMI splitters behind displays with HDCP issues.

No need for SIMPL+ here, just use the Serialize Date symbol. Speedkey is ‘date$’. This will take the time of day from the clock driver and give serial month/day/year in several formats. Really is

Heath, Thanks for the explanation. That is what I needed to hear. I only recently, over the last few jobs, grew my program out to the point that file size and compile time was getting out of hand. I

Hi, how do i implement the Simple+ module in Simple Windows? Help would be appreciated. PS: i am not familiar with Simple+

Ignore my last post. I was mixing the serial with the tcp-ip module. But if you see only hex values from the codec + something like "Command ignored" or not recognized, set admin and TANDBERG in the

You must leave the username unchanged in the module, that is "admin". And the hex traffic Devesh refer to is the initial telnet negotiation between the Linux engine in c40 and crestron. If you use

And I say it again. Hmmmmmmmmm.... I see multiple uses :)

Insert 0d in the tandberg module password slot if you have turned off the login in the codec otherwise you will get bunch of hex strings with absolutely no control. Regards, Devesh Gupta

Yes

What Nathan said and it will also output RGBHV. JRW

Thought experiment: You could theoretically take the HDMI out on a DM frame/card, feed it through a HDFury and back into the DM via a component card and spit it out as a non-HDCP HDMI source?