开云体育

Thanks a lot guys. I always ignored the warnings about jamming the signals but now I am more considerate and have followed the steps to use the RAM and it worked.

You could ping an IP address using the console symbol, BUT it locks up the entire program while it's waiting to time out. Not recommended, especially if there's any likelihood that the device is going

Console command just like you would from the command line: ping <IP Address>

I'm confirmed for the first Cypress session. -Chris Go West- Life is peaceful there Go West- In the open air Go West- Where the skies are blue Go West- This is what we're gonna do Go West, this is

Interested in making a phone that uses wifi into an RFID tag such that the crestron processor can poll IP addresses on the network and determine if myself or my wife is home based on whether or not

Haha, all good Neil I'll let you off this time :)

I have this exact thing going on now. I'm "just the programmer" on the job, so I haven't been dealing with it once I showed them it has nothing to do with the code. So now I know I'm not crazy.....

It sounds like you've narrowed it down to the output of the 6x1, cable, or RMC. Part of the reason I'm asking for behavior with a low-res source is lower resolution = lower bandwidth requirements =

I like flying into White Plains (HPN)

Thank you sir! -- Sebastian Marszalek

We'll take you to see a show at some local venue. I'm sure there will be something to see at the Coach House, the Grove or the Odyssey.. mb

It's a console command. Look in the series 2 reference guide. Prepare to be frustrated formatting the commands until you get the hang of it. You will be thankful once you do. :-) The command is

The cable run is about 60 feet. There are lightbulbs in the grid in the ceiling, but no electrical noise. With the PC the flickering is full screen. With the Mac, it's part of the screen. With HDMI,

When I lived in NYC I loved going to the Jazz bars and catching a live show. Most of time they were no names but it was still enjoyable. Central park is one of my favorite places for so many reasons

sorry, how do i access super debugger? -- Sebastian Marszalek

It was the DM-RMC-100 Thanks Guys -- Sebastian Marszalek

Use super debugger and press each button. I've had to do this before. On a simple panel it's not to bad. [Non-text portions of this message have been removed]

Hey guys, I just took over a project and the panel project I received is not what is currently uploaded to the TP. Is there a way to see what join numbers were assigned to the buttons?

It sounds like a D cable issue. How long is the cable run and are you near any sources of electrical noise? Can you provide more information about the "flickering" though? Is it full-screen or just a

Hi all, I have a DM-MD6x1 and DM-RMC 100. I terminated the cables twice, both D & M and still the video is flickering. The audio is okay. Any thoughts? Thanks so much in advance for your help. Dave