开云体育

Cresnet cables using RJ type connectors are wired straight through...not crossed over like the telco versions. /tr

Does anyone know if a standard telephone cable (with RJ-11 connectors) can be used to connect a CN-RJ11 to a LC-3000 touchpanel? The reason I ask is because the telephone cable reverses the order of

Does anyone out there have a CAGE2 available for a decent price? I can't believe how much Crestron charges for a simple interconnect. _________________________________________________________________

Can anyone help me with an ir driver to the onkyo dr815 dvd receiver? My ir learner died here at the job site :(

I know this has been discussed a bit before but I'm now confused by a response I got from Crestron. I'm specifically thinking about cresnet panels, as they consume so much time to send. My experience

Interesting....that processor is still on 3.154.1298 so not quite the newest. I will send it an update and see if that helps Thanks OP "went away" running, my always this .cuz after a it's

It's been a while since I've done one, but most Napco panels could be configured to do this automatically. If the panel is armed to Away mode, but no Entry/Exit doors are opened during the delay, it

There is a button on the Napco keypads called "Interior" which arms the perimeter but not the internal motions. Is there a serial command to emulate this button? Anyone have a protocol manual kicking

wrote: to will the of

what .cuz are you running? I had a problem similar to this* that "went away" when I upgraded to 3.155.1240. *the actual problem I was having was that after about 10 days of running, my CP2E would not

Okay, it will work. Thanks a ton for your help, Lincoln! -Rodney To: crestron@...: rodney_james_young@...: Thu, 10 Jan 2008 18:01:10 -0800Subject: RE: [Crestron] CNXVTC-3

It looks like it should work if I have a CAGE2 installed. The CAGE2 datasheet says it provides CNX series plug-in control cards. Unfortunately, I don't have SIMPL Windows here to check per Lincoln's

Because it's an inexpensive panel (V210) to purchase, and with the right access point, etc it's a decent alternative to spending $3000-4000 for a panel.

Hi Lincoln, No, I didn't know it takes the CAGE2 installed first. I am brand new to this Crestron programming game. I will start a session in SIMPL Windows and see if I can do what you say. Thanks!

I can't positively answer your question, but one of the first things to check is "Will SIMPL Windows all me to drop the card in a slot?" Also, I'm assuming you already know this, but if you have an

I am interested in purchasing a CNXVTC-3 Volume Control card. Does anyone know if this card is compatible with the AV2? It says in the CNXVTC-3 datasheet "...easily fit into an unoccupied slot in a

etc. Marcel, I have modified the module for use with this unit in Australia and use an analog intialize to set the channels. Email if I can help. Chris

I thought all the Pioneer commands were either 3 byte or 6 byte [not including ETX, STX, and ID characters]. I guess you learn something new every day.

Assuming this model follows the same RS232 protocol as other Pioneer displays.... To access a "." channel number use the 9 digit parameter [I don't recall what the first 3 digits are for but the

I think they have already started. From: Crestron@... [mailto:Crestron@...] On Behalf Of ryanwillden Sent: Thursday, January 10, 2008 10:13 AM To: Crestron@...