Hi - I tried to use a Enttec ODE?sACN MK3 using the sACN module in Simpl - but will not work. Anyone have the sane issue? No data traffic. I used?the MK2 version many times without problems..
On Wednesday, June 19, 2024, 6:59 AM, Stefan Andersson <stefan@...> wrote:
Okie, then its a totally different game.
I have been using Enttec ODE MK2 a few times to control front lights and so. Very basic and easy stuff.
To create chases and such stuff, you need to create our own in Crestron, sending DMX values, it takes little bit more time programming vise, but its doable. If you know S+ or S#, you could create your own module to do that for you, if not ¨C use CueServer or
similar. I know it cost a lot, but it¡¯s very easy if you want to record DMX streams for example, and create something with a light controller.
A lot of lamps have build in effects that might be good enough, then will it be easy to use Enttec ODE MK3, just send that value that trigger that effect you want.
BUT, I had issue with the built in sACN modul in simpl windows, it didn¡¯t work with my Serie4 processor ¨C but I found a module that did.
//Stefan
?
?
I'll be controlling AV with Crestron as well.
So, for example, when the push a button "Party", the music turns on, projector screen comes down with graphic visuals, and lights go to a particular preset with multi colors, chasing, etc.
