开云体育

SSH to 127.0.0.1. ? Issue whatever command you want. Use the SSH Client.?

Also if you have CTP enabled you can use a TCP/IP client on 41795.?

On Thu, Apr 9, 2020 at 5:26 PM Micky Kummer <mickyk1971@...> wrote:

Can you be more specific please?

On Fri, Apr 10, 2020 at 12:22 AM Erick Swihart <eswihart@...> wrote:

SSH Client the processor back to itself.? Should be able to execute. ?

On Thu, Apr 9, 2020 at 5:15 PM Micky Kummer <mickyk1971@...> wrote:

It's not for?debt collection or anything like this... I got a request from my client for a project that needs to be active for a period? of time for a system. it's not residential... . cant give out more details as its a hush hush project...

Any other way it can be done ??

On Thu, Apr 9, 2020 at 11:52 PM Lincoln King-Cliby <lincoln@...> wrote:

Some commands are inhibited via the console symbol – most of them kick back a “blocked from this console type” but every once in awhile there’s one that just doesn’t do anything.

?

I would be surprised if they actually let you initialize a processor from programming that easily – seems dangerous (and if you’re doing it as a debt collection method I’d very strongly suggest discussing the pitfalls and risks of that with your attorney especially for residential systems)

?

--

Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Platinum)
ControlWorks Consulting, LLC |
D: (+1)440.771.4807 | O: (+1)440.449.1100? | F: (+1)440.449.1106
Crestron Services Provider | Biamp Authorized Independent Programmers | Extron Qualified Independent Programmer

?

From: [email protected] <[email protected]> On Behalf Of Micky Kummer
Sent: Thursday, April 9, 2020 4:38 PM
To: [email protected]
Subject: Re: [crestron] console command via Simpl

?

Yes

initialize\n

Y\n

but after it reboots all comes back as nothing happened

?

?

On Thu, Apr 9, 2020 at 11:36 PM Phil Bridges <gravityhammer@...> wrote:

have you tried sending?"initialize y\r"?

?

On Thu, Apr 9, 2020 at 4:28 PM Micky Kummer <mickyk1971@...> wrote:

ok thanks

trying to send the command initialize

I get back "are you sure" Y or N

Sending Y but nothing happens

?

On Thu, Apr 9, 2020 at 10:27 PM Oliver Hall <oliver.hall@...> wrote:

Under extended symbols, there’s a “console” symbol for just that.? Not all commands are allowed though.