开云体育

console command via Simpl

Micky Kummer All Messages By This Member #234702 Hi Is it possible to send a direct console command via the Simpl program? Thanks M?
Phil Bridges All Messages By This Member #234704 Sure - use a console symbol and your preferred?method of generating serial strings. toggle quoted message Show quoted text On Thu, Apr 9, 2020 at 2:05 PM <mickyk1971@...> wrote: Hi Is it possible to send a direct console command via the Simpl program? Thanks M?
Micky Kummer All Messages By This Member #234707 cant find the console symbol in Simpl?Windows toggle quoted message Show quoted text On Thu, Apr 9, 2020 at 9:13 PM Phil Bridges <gravityhammer@...> wrote: Sure - use a console symbol and your preferred?method of generating serial strings. On Thu, Apr 9, 2020 at 2:05 PM <mickyk1971@...> wrote: Hi Is it possible to send a direct console command via the Simpl program? Thanks M?
Phil Bridges All Messages By This Member #234708 The shortcut is "console" toggle quoted message Show quoted text On Thu, Apr 9, 2020 at 2:40 PM Micky Kummer <mickyk1971@...> wrote: cant find the console symbol in Simpl?Windows On Thu, Apr 9, 2020 at 9:13 PM Phil Bridges <gravityhammer@...> wrote: Sure - use a console symbol and your preferred?method of generating serial strings. On Thu, Apr 9, 2020 at 2:05 PM <mickyk1971@...> wrote: Hi Is it possible to send a direct console command via the Simpl program? Thanks M?
Scott Pidzarko All Messages By This Member #234709 Make sure you have special symbols turned on in your Simpl preferences if you want to find it in the folders, should you forget the speedkey. toggle quoted message Show quoted text On Thu., Apr. 9, 2020, 11:57 a.m. Phil Bridges, <gravityhammer@...> wrote: The shortcut is "console" On Thu, Apr 9, 2020 at 2:40 PM Micky Kummer <mickyk1971@...> wrote: cant find the console symbol in Simpl?Windows On Thu, Apr 9, 2020 at 9:13 PM Phil Bridges <gravityhammer@...> wrote: Sure - use a console symbol and your preferred?method of generating serial strings. On Thu, Apr 9, 2020 at 2:05 PM <mickyk1971@...> wrote: Hi Is it possible to send a direct console command via the Simpl program? Thanks M?
Oliver Hall All Messages By This Member #234712 Under extended symbols, there’s a “console” symbol for just that. ?Not all commands are allowed though.
Micky Kummer All Messages By This Member #234713 ok thanks trying to send the command initialize I get back "are you sure" Y or N Sending Y but nothing happens toggle quoted message Show quoted text On Thu, Apr 9, 2020 at 10:27 PM Oliver Hall <oliver.hall@...> wrote: Under extended symbols, there’s a “console” symbol for just that.? Not all commands are allowed though.
Phil Bridges All Messages By This Member #234714 have you tried sending?"initialize y\r"? toggle quoted message Show quoted text On Thu, Apr 9, 2020 at 4:28 PM Micky Kummer <mickyk1971@...> wrote: ok thanks trying to send the command initialize I get back "are you sure" Y or N Sending Y but nothing happens On Thu, Apr 9, 2020 at 10:27 PM Oliver Hall <oliver.hall@...> wrote: Under extended symbols, there’s a “console” symbol for just that.? Not all commands are allowed though.
Micky Kummer All Messages By This Member #234716 Yes initialize\n Y\n but after it reboots all comes back as nothing happened toggle quoted message Show quoted text On Thu, Apr 9, 2020 at 11:36 PM Phil Bridges <gravityhammer@...> wrote: have you tried sending?"initialize y\r"? On Thu, Apr 9, 2020 at 4:28 PM Micky Kummer <mickyk1971@...> wrote: ok thanks trying to send the command initialize I get back "are you sure" Y or N Sending Y but nothing happens On Thu, Apr 9, 2020 at 10:27 PM Oliver Hall <oliver.hall@...> wrote: Under extended symbols, there’s a “console” symbol for just that.? Not all commands are allowed though.
Lincoln King-Cliby All Messages By This Member #234717 开云体育 Some commands are inhibited via the console symbol – most of them kick back a “blocked from this console type” but every once in awhile there’s one that just doesn’t do anything. ? I would be surprised if they actually let you initialize a processor from programming that easily – seems dangerous (and if you’re doing it as a debt collection method I’d very strongly suggest discussing the pitfalls and risks of that with your attorney especially for residential systems) ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect \| Crestron Certified Master Programmer (Platinum) ControlWorks Consulting, LLC \| D: (+1)440.771.4807 \| O: (+1)440.449.1100? \| F: (+1)440.449.1106 Crestron Services Provider \| Biamp Authorized Independent Programmers \| Extron Qualified Independent Programmer ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of Micky Kummer Sent: Thursday, April 9, 2020 4:38 PM To: [email protected] Subject: Re: [crestron] console command via Simpl ? Yes initialize\n Y\n but after it reboots all comes back as nothing happened ? ? On Thu, Apr 9, 2020 at 11:36 PM Phil Bridges <gravityhammer@...> wrote: have you tried sending?"initialize y\r"? ? On Thu, Apr 9, 2020 at 4:28 PM Micky Kummer <mickyk1971@...> wrote: ok thanks trying to send the command initialize I get back "are you sure" Y or N Sending Y but nothing happens ? On Thu, Apr 9, 2020 at 10:27 PM Oliver Hall <oliver.hall@...> wrote: Under extended symbols, there’s a “console” symbol for just that.? Not all commands are allowed though.
Micky Kummer All Messages By This Member #234718 It's not for?debt collection or anything like this... I got a request from my client for a project that needs to be active for a period? of time for a system. it's not residential... . cant give out more details as its a hush hush project... Any other way it can be done ?? toggle quoted message Show quoted text On Thu, Apr 9, 2020 at 11:52 PM Lincoln King-Cliby <lincoln@...> wrote: Some commands are inhibited via the console symbol – most of them kick back a “blocked from this console type” but every once in awhile there’s one that just doesn’t do anything. ? I would be surprised if they actually let you initialize a processor from programming that easily – seems dangerous (and if you’re doing it as a debt collection method I’d very strongly suggest discussing the pitfalls and risks of that with your attorney especially for residential systems) ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect \| Crestron Certified Master Programmer (Platinum) ControlWorks Consulting, LLC \| D: (+1)440.771.4807 \| O: (+1)440.449.1100? \| F: (+1)440.449.1106 Crestron Services Provider \| Biamp Authorized Independent Programmers \| Extron Qualified Independent Programmer ? From: [email protected] <[email protected]> On Behalf Of Micky Kummer Sent: Thursday, April 9, 2020 4:38 PM To: [email protected] Subject: Re: [crestron] console command via Simpl ? Yes initialize\n Y\n but after it reboots all comes back as nothing happened ? ? On Thu, Apr 9, 2020 at 11:36 PM Phil Bridges <gravityhammer@...> wrote: have you tried sending?"initialize y\r"? ? On Thu, Apr 9, 2020 at 4:28 PM Micky Kummer <mickyk1971@...> wrote: ok thanks trying to send the command initialize I get back "are you sure" Y or N Sending Y but nothing happens ? On Thu, Apr 9, 2020 at 10:27 PM Oliver Hall <oliver.hall@...> wrote: Under extended symbols, there’s a “console” symbol for just that.? Not all commands are allowed though.
Erick Swihart All Messages By This Member #234719 SSH Client the processor back to itself.? Should be able to execute. ? toggle quoted message Show quoted text On Thu, Apr 9, 2020 at 5:15 PM Micky Kummer <mickyk1971@...> wrote: It's not for?debt collection or anything like this... I got a request from my client for a project that needs to be active for a period? of time for a system. it's not residential... . cant give out more details as its a hush hush project... Any other way it can be done ?? On Thu, Apr 9, 2020 at 11:52 PM Lincoln King-Cliby <lincoln@...> wrote: Some commands are inhibited via the console symbol – most of them kick back a “blocked from this console type” but every once in awhile there’s one that just doesn’t do anything. ? I would be surprised if they actually let you initialize a processor from programming that easily – seems dangerous (and if you’re doing it as a debt collection method I’d very strongly suggest discussing the pitfalls and risks of that with your attorney especially for residential systems) ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect \| Crestron Certified Master Programmer (Platinum) ControlWorks Consulting, LLC \| D: (+1)440.771.4807 \| O: (+1)440.449.1100? \| F: (+1)440.449.1106 Crestron Services Provider \| Biamp Authorized Independent Programmers \| Extron Qualified Independent Programmer ? From: [email protected] <[email protected]> On Behalf Of Micky Kummer Sent: Thursday, April 9, 2020 4:38 PM To: [email protected] Subject: Re: [crestron] console command via Simpl ? Yes initialize\n Y\n but after it reboots all comes back as nothing happened ? ? On Thu, Apr 9, 2020 at 11:36 PM Phil Bridges <gravityhammer@...> wrote: have you tried sending?"initialize y\r"? ? On Thu, Apr 9, 2020 at 4:28 PM Micky Kummer <mickyk1971@...> wrote: ok thanks trying to send the command initialize I get back "are you sure" Y or N Sending Y but nothing happens ? On Thu, Apr 9, 2020 at 10:27 PM Oliver Hall <oliver.hall@...> wrote: Under extended symbols, there’s a “console” symbol for just that.? Not all commands are allowed though.
Micky Kummer All Messages By This Member #234721 Can you be more specific please? toggle quoted message Show quoted text On Fri, Apr 10, 2020 at 12:22 AM Erick Swihart <eswihart@...> wrote: SSH Client the processor back to itself.? Should be able to execute. ? On Thu, Apr 9, 2020 at 5:15 PM Micky Kummer <mickyk1971@...> wrote: It's not for?debt collection or anything like this... I got a request from my client for a project that needs to be active for a period? of time for a system. it's not residential... . cant give out more details as its a hush hush project... Any other way it can be done ?? On Thu, Apr 9, 2020 at 11:52 PM Lincoln King-Cliby <lincoln@...> wrote: Some commands are inhibited via the console symbol – most of them kick back a “blocked from this console type” but every once in awhile there’s one that just doesn’t do anything. ? I would be surprised if they actually let you initialize a processor from programming that easily – seems dangerous (and if you’re doing it as a debt collection method I’d very strongly suggest discussing the pitfalls and risks of that with your attorney especially for residential systems) ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect \| Crestron Certified Master Programmer (Platinum) ControlWorks Consulting, LLC \| D: (+1)440.771.4807 \| O: (+1)440.449.1100? \| F: (+1)440.449.1106 Crestron Services Provider \| Biamp Authorized Independent Programmers \| Extron Qualified Independent Programmer ? From: [email protected] <[email protected]> On Behalf Of Micky Kummer Sent: Thursday, April 9, 2020 4:38 PM To: [email protected] Subject: Re: [crestron] console command via Simpl ? Yes initialize\n Y\n but after it reboots all comes back as nothing happened ? ? On Thu, Apr 9, 2020 at 11:36 PM Phil Bridges <gravityhammer@...> wrote: have you tried sending?"initialize y\r"? ? On Thu, Apr 9, 2020 at 4:28 PM Micky Kummer <mickyk1971@...> wrote: ok thanks trying to send the command initialize I get back "are you sure" Y or N Sending Y but nothing happens ? On Thu, Apr 9, 2020 at 10:27 PM Oliver Hall <oliver.hall@...> wrote: Under extended symbols, there’s a “console” symbol for just that.? Not all commands are allowed though.
Erick Swihart All Messages By This Member #234722 SSH to 127.0.0.1. ? Issue whatever command you want. Use the SSH Client.? Also if you have CTP enabled you can use a TCP/IP client on 41795.? toggle quoted message Show quoted text On Thu, Apr 9, 2020 at 5:26 PM Micky Kummer <mickyk1971@...> wrote: Can you be more specific please? On Fri, Apr 10, 2020 at 12:22 AM Erick Swihart <eswihart@...> wrote: SSH Client the processor back to itself.? Should be able to execute. ? On Thu, Apr 9, 2020 at 5:15 PM Micky Kummer <mickyk1971@...> wrote: It's not for?debt collection or anything like this... I got a request from my client for a project that needs to be active for a period? of time for a system. it's not residential... . cant give out more details as its a hush hush project... Any other way it can be done ?? On Thu, Apr 9, 2020 at 11:52 PM Lincoln King-Cliby <lincoln@...> wrote: Some commands are inhibited via the console symbol – most of them kick back a “blocked from this console type” but every once in awhile there’s one that just doesn’t do anything. ? I would be surprised if they actually let you initialize a processor from programming that easily – seems dangerous (and if you’re doing it as a debt collection method I’d very strongly suggest discussing the pitfalls and risks of that with your attorney especially for residential systems) ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect \| Crestron Certified Master Programmer (Platinum) ControlWorks Consulting, LLC \| D: (+1)440.771.4807 \| O: (+1)440.449.1100? \| F: (+1)440.449.1106 Crestron Services Provider \| Biamp Authorized Independent Programmers \| Extron Qualified Independent Programmer ? From: [email protected] <[email protected]> On Behalf Of Micky Kummer Sent: Thursday, April 9, 2020 4:38 PM To: [email protected] Subject: Re: [crestron] console command via Simpl ? Yes initialize\n Y\n but after it reboots all comes back as nothing happened ? ? On Thu, Apr 9, 2020 at 11:36 PM Phil Bridges <gravityhammer@...> wrote: have you tried sending?"initialize y\r"? ? On Thu, Apr 9, 2020 at 4:28 PM Micky Kummer <mickyk1971@...> wrote: ok thanks trying to send the command initialize I get back "are you sure" Y or N Sending Y but nothing happens ? On Thu, Apr 9, 2020 at 10:27 PM Oliver Hall <oliver.hall@...> wrote: Under extended symbols, there’s a “console” symbol for just that.? Not all commands are allowed though.
Micky Kummer All Messages By This Member #234725 Cant find the SSH Client toggle quoted message Show quoted text On Fri, Apr 10, 2020 at 12:29 AM Erick Swihart <eswihart@...> wrote: SSH to 127.0.0.1. ? Issue whatever command you want. Use the SSH Client.? Also if you have CTP enabled you can use a TCP/IP client on 41795.? On Thu, Apr 9, 2020 at 5:26 PM Micky Kummer <mickyk1971@...> wrote: Can you be more specific please? On Fri, Apr 10, 2020 at 12:22 AM Erick Swihart <eswihart@...> wrote: SSH Client the processor back to itself.? Should be able to execute. ? On Thu, Apr 9, 2020 at 5:15 PM Micky Kummer <mickyk1971@...> wrote: It's not for?debt collection or anything like this... I got a request from my client for a project that needs to be active for a period? of time for a system. it's not residential... . cant give out more details as its a hush hush project... Any other way it can be done ?? On Thu, Apr 9, 2020 at 11:52 PM Lincoln King-Cliby <lincoln@...> wrote: Some commands are inhibited via the console symbol – most of them kick back a “blocked from this console type” but every once in awhile there’s one that just doesn’t do anything. ? I would be surprised if they actually let you initialize a processor from programming that easily – seems dangerous (and if you’re doing it as a debt collection method I’d very strongly suggest discussing the pitfalls and risks of that with your attorney especially for residential systems) ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect \| Crestron Certified Master Programmer (Platinum) ControlWorks Consulting, LLC \| D: (+1)440.771.4807 \| O: (+1)440.449.1100? \| F: (+1)440.449.1106 Crestron Services Provider \| Biamp Authorized Independent Programmers \| Extron Qualified Independent Programmer ? From: [email protected] <[email protected]> On Behalf Of Micky Kummer Sent: Thursday, April 9, 2020 4:38 PM To: [email protected] Subject: Re: [crestron] console command via Simpl ? Yes initialize\n Y\n but after it reboots all comes back as nothing happened ? ? On Thu, Apr 9, 2020 at 11:36 PM Phil Bridges <gravityhammer@...> wrote: have you tried sending?"initialize y\r"? ? On Thu, Apr 9, 2020 at 4:28 PM Micky Kummer <mickyk1971@...> wrote: ok thanks trying to send the command initialize I get back "are you sure" Y or N Sending Y but nothing happens ? On Thu, Apr 9, 2020 at 10:27 PM Oliver Hall <oliver.hall@...> wrote: Under extended symbols, there’s a “console” symbol for just that.? Not all commands are allowed though.

Previous Topic Next Topic