I found that setting when I was having a look around earlier, it was set to enabled. The panel was working perfectly up until the end of last week then developed this problem.
toggle quoted message
Show quoted text
--- In Crestron@..., "Chip" <cfm@...> wrote:
For reasons I can't fathom, this panel (I'm sure it must be on others as well) has a "Cresnet On/Off" setting in the setup pages...
:(
- Chip
--- In Crestron@..., "roray32" <roray.stewart@> wrote:
Hi,
I have TPMC-12 which appears to have developed a problem with its Cresnet connection. In toolbox I can see the panel on IP, looking at the AV2 it's connected to it lists no Cresnet devices attached. I have re-uploading the code and have also re-uploaded the firmware to the panel but this has made no difference. I can see the code on the panel but when operating it just carries out page flips, doesn't control the system in any way.
Panel is running firmware: 1.00.02.90
Any ideas as to what else I can check or try before I send it back for repair.
Thanks
Roray
