I had an issue where a comment with "" in the parameter field caused
reboots.
I didn't want it to put anything into console. I was only using as a
placeholder in the logic tree, and as a reminder as I built up the project
and added rooms, and devices, I needed to initialize their crosspoint IDs.
Otherwise it was upload, test, $(*@#&(*&, add the ID, upload.
Taking out the null comment fixed it.
toggle quoted message
Show quoted text
On Tue, May 14, 2013 at 10:19 AM, eagrubbs <eagrubbs@...> wrote:
**
Well that can't be your problem. What other simpl+ stuff do yo have going
on?
--- In Crestron@..., "coolaiddrinker" <coolaiddrinker@...>
wrote:
i have biamp modules in the program only 3 dialer, mic mute and vol
control v5.2
--- In Crestron@..., "eagrubbs" <eagrubbs@> wrote:
What is your dsp in this system? On the av2 I had issues with, the
program was using BSS audio modules. The newest modules off of the BSS site
would lock that av2 everytime. Reverted to some older modules and no more
problems. I could load that same program that would lock the av2 and it
would run fine on MPC-M10. I still would like to know why the av2 would
lock though. The program was really small too: 80 symbols, 314 digital, 24
analog, 25 serial, so I know it wasn't out of memory.
