+1. My 2007 46" Sharp doesn't blink at 1080p60 over component. The 46" JVC I bought a year or so back, not so much. But it *does* support 1080p30 on HDMI, which the Sharp doesn't. Go figure.
- Chip
toggle quoted message
Show quoted text
--- In Crestron@..., Neil Dorin <neildorin@...> wrote:
My Sharp LC-52D82U does it as did many Sharp consumer displays and a few
Sony's.
That's how I run my gen 1 xBox 360 at 1080p.
-Neil
On Tue, Sep 18, 2012 at 1:44 PM, Nathan Hesson <nhesson@...> wrote:
**
Your last statement is not entirely true. the HDFury WILL output 1080p via
component. HOWEVER, your display needs to support 1080p via component and
that is less likely. I've seen more than a few high end projectors do it
though.
On Tue, Sep 18, 2012 at 12:39 PM, Pat Molettieri
<pat.molettieri@...>wrote:
It takes your HDMI signal and converts to component. Will save you in a
bind but no 1080p picture quality.
Pat M
On Sep 18, 2012, at 1:44 PM, "eagrubbs" <eagrubbs@...> wrote:
So it passes video to non-HDCP destinations? Hmmmmm.....
--- In Crestron@..., Mark Conde <mcjaran@> wrote:
That is it HD Fury.
Thanks a Bunch!
________________________________
From: Chip <cfm@>
To: Crestron@...
Sent: Tuesday, September 18, 2012 12:48 PM
Subject: [Crestron] Re: Non-HDCP Compliant Monitor ??
?
You might be thinking of the "HD Fury" adapter...
- Chip
--- In Crestron@..., "mcjaran" <mcjaran@> wrote:
A while back someone suggested a device to show HDCP compliant
devices on a Non-HDCP compliant monitor.
Any suggestions?
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
