开云体育

Hi John (G8BPQ), I hope you have read my message of a couple of days ago to the list that outgoing IPv6 telnet forwarding doesn't work in the latest beta as well as the stable version. It fails to connect if I test it manually to a IPv6 only accessible tcp port. This makes that I can't forward to telnet servers who are only accessible over IPv6 or that IPv4/IPv6 accessible ports fall back to IPv4. They can access BPQ here with IPv6 over telnet, so luckily the mail flows with reserve forwarding in that way. Is there any solution to this? Regards, Boudewijn VE3TOK --- The issue with BPQ seems to be not the 'defaulting to IPv4' but that outgoing telnet to IPv6 fails to connect at all both in the latest stable and beta versions and this while IPv4 and IPv6 are both enabled for the telnet port, see below. -- I tested outgoing telnet from the BPQ node to a tcp port what can only handle IPv6 as I have a 6tunnel for IPv6 to Xnet, what is a IPv4 only program. 6tunnel converts here a IPv6 input at tcp port 24 to IPv4 at tcp port 23 what connects to Xnet. BPQ po BPQTOK:VE3TOK-12} Ports 1 Kiss Link to Kernel 2 Kiss Link to (X)net 3 Telnet Server 4 AX/IP/UDP attach 3 BPQTOK:VE3TOK-12} Ok c linux.ve3mch.ampr.org 24 *** Failed to Connect linux.ve3mch.ampr.org resolves both to an IPv4 and IPV6 address. I tested this from the latest stable BPQ version as well as from the latest beta version and both are failing with outgoing telnet over IPv6. Both IPv4 and IPv6 are enabled for the telnet port in BPQ with, IPV6=1 IPV4=1 From the linux shell to proof that IPv6 really works at port 24 # telnet linux.ve3mch.ampr.org 24 Trying 2001:470:1d:138::1... Connected to linux.ve3mch.ampr.org. Escape character is '^]'. (X)NET 1.39 @ VE3MCH-8 on LINUX: PSE enter Your callsign to login. Login: With IPv4 from the shell to Xnet at port 24 telnet -4 linux.ve3mch.ampr.org 24 Trying 44.135.85.151... telnet: Unable to connect to remote host: Connection refused What is as expected. Regards, Boudewijn VE3TOK -- There is nothing permanent except change Heraclitus

Aloha, I’m looking for a few more testers to help field test Packet Commander, a new iOS app I’ve been developing. It’s a terminal for AX.25 packet radio, built specifically for iPhone and iPad. So far, it’s been in closed beta with a small group of operators and has received great feedback. You can learn more about the app here: https://packetcommander.com I’d like to expand testing across a broader range of setups. Currently, most testers are using BTECH UV-PRO HTs to connect to node running linbpq. I’m hoping to gain more coverage across different TNCs and node types. (Yes, I realize this is a BPQ mailing list, but it’s one of the most active packet communities I’ve found, and I’m hoping to reach folks with deep experience and access to a variety of AX.25 node platforms. My knowledge in that regard is still developing, and I literally live on an island with zero packet activity.) If you’re interested and meet the following criteria: ? You have an iPhone or iPad running iOS 18.2 or later ? You regularly connect to AX.25 nodes on VHF/UHF ? You use a TNC that works with iOS (see the supported list at the link above) ? You’re familiar with TestFlight ? You’re willing to provide thoughtful feedback and bug reports Please reach out directly with the configuration you’d like to test. Thanks and 73, Georges WH6AZ

Good evening Enjoying trying to get linbpq setup for aprs - Currently the only path I see on aprs.fi is tcpip. However, if I run Direwolf alone, I get an RF path frequently. I have digimap setup, and the aprs path is wide2-1, as well.

John, I just noticed an unexpected restart for the #USWST chat hub. There are no RF ports on this system. The only 2 ports are AXIP and Telnet. It is a Debian Bookworm 12.10 x64 based vpn updated just a few days ago. The following is from the console. The first 3 lines are from my wrapper script but note the time is in PDT so for the moment is -7 hrs from UTC... also note that the executable was stripped after compile so I am guessing what follows may not be much help. I will rerun a non-stripped copy and if necessary via gdb if needed. ** * LinBPQ restart - 20250518200601 ** G8BPQ AX25 Packet Switch System Version 6.0.24.71 April 2025 Copyright 2001-2025 John Wiseman G8BPQ Current Directory is /home/linbpq/linbpq Log Directory is /home/linbpq/linbpq Making Directory /home/linbpq/linbpq/logs Configuration file Preprocessor. Using Configuration file /home/linbpq/linbpq/bpq32.cfg Conversion (probably) successful PORTS 0x55f9b7982e60 LINKS 0x55f9b7984ea0 DESTS 0x55f9b798aea0 ROUTES 0x55f9b7993b40 L4 0x55f9b7995940 BUFFERS 0x55f9b799e980 Initialising Port 01 AXIP Initialising Port 02 Telnet Server MQTT Enabled 0 Starting Chat Config File is /home/linbpq/linbpq/chatconfig.cfg Chat Started slave device: /dev/pts/0. symlink to /tmp/bpqtnc2 created TNC Emulator Init Complete SIGSEGV Received ./linbpq(+0x13b28c)[0x55f9b785628c] /lib/x86_64-linux-gnu/libc.so.6(+0x3c050)[0x7ffaa225b050] /lib/x86_64-linux-gnu/libc.so.6(+0xa9d76)[0x7ffaa22c8d76] /lib/x86_64-linux-gnu/libc.so.6(+0x5e258)[0x7ffaa227d258] /lib/x86_64-linux-gnu/libc.so.6(+0x7e758)[0x7ffaa229d758] ./linbpq(+0x1a15ee)[0x55f9b78bc5ee] ./linbpq(+0x1a5861)[0x55f9b78c0861] ./linbpq(+0x1a58ae)[0x55f9b78c08ae] ./linbpq(+0x1a6029)[0x55f9b78c1029] ./linbpq(+0x1a9754)[0x55f9b78c4754] SIGSEGV Received ./linbpq(+0x13b28c)[0x55f9b785628c] /lib/x86_64-linux-gnu/libc.so.6(+0x3c050)[0x7ffaa225b050] /lib/x86_64-linux-gnu/libc.so.6(+0xa9d76)[0x7ffaa22c8d76] /lib/x86_64-linux-gnu/libc.so.6(+0x5e258)[0x7ffaa227d258] /lib/x86_64-linux-gnu/libc.so.6(+0x7e758)[0x7ffaa229d758] ./linbpq(+0x1a15ee)[0x55f9b78bc5ee] ./linbpq(+0x1a5861)[0x55f9b78c0861] ./linbpq(+0x1a58ae)[0x55f9b78c08ae] ./linbpq(+0x1a6029)[0x55f9b78c1029] ./linbpq(+0x1a9754)[0x55f9b78c4754] Tnx es 73 de Rich WA3WLH

Good evening I am using Direwolf with linbpq as an APRS setup. However, not seeing the inet stream in direwolf, nor are stations populating on the aprs map from the bpq server. Here's what I have - ISHost=rotate.aprs2.net ; APRS-IS Host Name. May be either an IPV4 or an IPV6 Host ISPort=14580 ; Normal port for a filtered feed ISPasscode=8334 ; If you don't already have a passcode I can issue you one. ; ; You can specify a filter command to be sent when you log on to APRS-IS. Normally you don't ; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it starts, ; and if you aren't running an APRS application, there isn't much point in getting info from APRS-IS ; ISFilter=m/64 ;GateLocalDistance=0 ;GATEDPATH 3=APRS LOGAPRSIS=1

Looking to add a UHF port to our LinBPOQ site. Any recommendations, either for or against, for a used radio? Running a Kenwood TM-271 for VHF. Dave Menges

Trying to get the latest and greatest, since it has been a while since I compiled a fresh binary on my slackware box. Looks like it is looking for a library related to The Internet of Things client "libpaho-mqtt3a" (or at least the library for it). I am thinking this is a new dependency that does not come bundled with Slackware 15. Unfortunately not in the Slackbuilds 3rd party repo. gcc -DLINBPQ -MMD -g -rdynamic -fcommon -fasynchronous-unwind-tables -c -o RHP.o RHP.c gcc pngwtran.o pngrtran.o pngset.o pngrio.o pngwio.o pngtrans.o pngrutil.o pngwutil.o pngread.o pngwrite.o png.o pngerror.o pngget.o pngmem.o APRSIconData.o AISCommon.o upnp.o APRSStdPages.o HSMODEM.o WinRPR.o KISSHF.o TNCEmulators.o bpqhdlc.o SerialPort.o adif.o WebMail.o utf8Routines.o VARA.o LzFind.o Alloc.o LzmaDec.o LzmaEnc.o LzmaLib.o Multicast.o ARDOP.o IPCode.o FLDigi.o linether.o CMSAuth.o APRSCode.o BPQtoAGW.o KAMPactor.o AEAPactor.o HALDriver.o MULTIPSK.o BBSHTMLConfig.o ChatHTMLConfig.o BBSUtilities.o bpqaxip.o BPQINP3.o BPQNRR.o cMain.o Cmd.o CommonCode.o HTMLCommonCode.o compatbits.o config.o datadefs.o FBBRoutines.o HFCommon.o Housekeeping.o HTTPcode.o kiss.o L2Code.o L3Code.o L4Code.o lzhuf32.o MailCommands.o MailDataDefs.o LinBPQ.o MailRouting.o MailTCP.o MBLRoutines.o md5.o Moncode.o NNTPRoutines.o RigControl.o TelnetV6.o WINMOR.o TNCCode.o UZ7HODrv.o WPRoutines.o SCSTrackeMulti.o SCSPactor.o SCSTracker.o HanksRT.o UIRoutines.o AGWAPI.o AGWMoncode.o DRATS.o FreeDATA.o base64.o Events.o nodeapi.o mailapi.o mqtt.o RHP.o -Xlinker -Map=output.map -l:libminiupnpc.so -lrt -lm -lz -l:libpaho-mqtt3a.a -l:libjansson.a -lpthread -lconfig -lpcap -o linbpq /usr/bin/ld: cannot find -l:libpaho-mqtt3a.a /usr/bin/ld: cannot find -l:libjansson.a collect2: error: ld returned 1 exit status make: *** [makefile:35: linbpq] Error 1 Please advise :D -- Thanks, Chris Maness

I was able to resolve it by building from source On May 21, 2025, at 09:27, Robert Cartier via groups.io <kd1jg@...> wrote: John I downloaded the latest QtSoundModem and am getting the error of cant open object of QtSoundModem: error while loading shared libraries: libfftw3f.so.3: I installed all the libraries based on the webpage Thanks in Advance Ron - kd1jg Robert Cartier kd1jg@...

John I downloaded the latest QtSoundModem and am getting the error of cant open object of QtSoundModem: error while loading shared libraries: libfftw3f.so.3: I installed all the libraries based on the webpage Thanks in Advance Ron - kd1jg

Good Evening All, I have been fighting to get a simple UHF node up in my town that would work as a RMS and Chat node. I wanted to share this example config file for any newcomers to this software (like myself) to have a easy way to get started, and hopefully expand onto what is in this basic setup. Now that I have something simple built, time to get my friends to pick up some TNC's ? https://github.com/N1OF/LinBPQ-Config 73's Scott, N1OF

John, As the TCP-SLAVE side of a connection I assumed that I would never initiate a connection. I am seeing the following: 13:35:48T N5MDT-13>N4NVD-3 Port=2 <XID C P> 2=21 3=22a486 RX Paclen=256 RX Window=7 I have different ports for AXUDP (port 1) and AXTCP (port 2.) The above line is obviously the Port 2 Monitor and it looks to me like it is a connection request being initiated by me. However, I am seeing a similar line to a well established and connected AXTCP link to N3HYM. Now, earlier today, I switched N4NVD from TCP (port 2) back to UDP (port 1) and restarted. The UDP route is stable using port 1. However, I am still seeing the above line in the port 2 monitor. So, what exactly is the XID packet? When should I expect to see these cease for N4NVD? The axipcache1.cfg file contains only port 1 connections. I do not see a port 2 cache file. Is there one that I can empty to stop these XID packets to N4NVD sooner than letting it time out on its own? Thanks -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852

I have written a message responder app using the POP3/SMTP interfaces. That seems to be working OK, but when I send from the account I created for that purpose (worpin@gb7wor.#32.gbr.euro) it fails. I have some traces using the standard HTML webmail interface, using my account (G7TWZ) which works fine: 250519 20:37:33 | Webmail Connect from G7TWZ 250519 20:37:48 ?G7TWZ Msg 2497 Routing Trace To PING Via GB7CIP.#32.GBR.EURO 250519 20:37:48 ?G7TWZ Routing Trace Type P TO PING VIA GB7CIP.#32.GBR.EURO Route On WW EU GBR #32 GB7CIP 250519 20:37:48 ?G7TWZ SendPtoMultiple is set. Checking for best match level 250519 20:37:48 ?G7TWZ Routing Trace GB7CIP Matches implied AT GB7CIP 250519 20:38:07 |GB7CIP Connecting to BBS GB7CIP 250519 20:38:07 <GB7CIP *** CONNECTED 250519 20:38:07 >GB7CIP C 1 GB7CIP-0 250519 20:38:09 <GB7CIP WORNOD:GB7WOR-7} Connected to GB7CIP 250519 20:38:10 <GB7CIP [FBB-7.0.11-AB1FHMRX$] 250519 20:38:10 <GB7CIP {PROTUS-4.1 2} 250519 20:38:10 <GB7CIP GB7CIP Mailbox, QTH Caterham Surrey GBR. 250519 20:38:10 <GB7CIP Msg(s) to Fwd 0 0 Kb 250519 20:38:10 <GB7CIP (2) GB7CIP BBS> 250519 20:38:10 >GB7CIP [BPQ-6.0.24.69-B1FIHJM$] 250519 20:38:10 >GB7CIP FA P G7TWZ GB7CIP.#32.GBR.EURO PING 2497_GB7WOR 55 250519 20:38:10 >GB7CIP F> 90 250519 20:38:14 <GB7CIP FS Y 250519 20:38:14 | Compressed Message Comp Len 66 Msg Len 57 CRC 8bd1 250519 20:39:19 <GB7CIP FF 250519 20:39:19 >GB7CIP FQ 250519 20:39:22 |GB7CIP GB7CIP Disconnected I have the same from the worpin account, which fails: 250519 20:43:06 | Webmail Connect from WORPIN 250519 20:43:29 ?WORPIN Msg 2498 Routing Trace To PING Via GB7CIP.#32.GBR.EURO 250519 20:43:29 ?WORPIN Routing Trace Type P TO PING VIA GB7CIP.#32.GBR.EURO Route On WW EU GBR #32 GB7CIP 250519 20:43:29 ?WORPIN SendPtoMultiple is set. Checking for best match level 250519 20:43:29 ?WORPIN Routing Trace GB7CIP Matches implied AT GB7CIP 250519 20:43:56 |GB7CIP Connecting to BBS GB7CIP 250519 20:43:56 <GB7CIP *** CONNECTED 250519 20:43:56 >GB7CIP C 1 GB7CIP-0 250519 20:43:58 <GB7CIP WORNOD:GB7WOR-7} Connected to GB7CIP 250519 20:44:16 <GB7CIP [FBB-7.0.11-AB1FHMRX$] 250519 20:44:16 <GB7CIP {PROTUS-4.1 2} 250519 20:44:16 <GB7CIP GB7CIP Mailbox, QTH Caterham Surrey GBR. 250519 20:44:16 <GB7CIP Msg(s) to Fwd 1 0 Kb 250519 20:44:16 <GB7CIP (2) GB7CIP BBS> 250519 20:44:16 >GB7CIP [BPQ-6.0.24.69-B1FIHJM$] 250519 20:44:16 >GB7CIP FA P WORPIN GB7CIP.#32.GBR.EURO PING 2498_GB7WOR 55 250519 20:44:16 >GB7CIP F> 33 250519 20:44:21 <GB7CIP FS R 250519 20:44:21 <GB7CIP FA P GB7CIP GB7WOR.#32.GBR.EURO G7TWZ 32967_GB7CIP 186 250519 20:44:21 <GB7CIP F> B8 250519 20:44:21 >GB7CIP FS + Any ideas?

Presently running version 6.0.24.71 and IPv4 / IPv6 enabled as usual here. What I see with forwarding to hostnames who resolves to both IPv4 and IPv6 addresses BPQ defaults to IPv4 forwarding. I believe that this was not always the case with older releases and that BPQ was using the Linux / Windows convention, that is try IPv6 first and when not possible fall back to IPv6 - Regards, Boudewijn, VE3TOK There is nothing permanent except change Heraclitus

Has anyone used systemd to start QtSoundmodem? If so, can you share the service file? Dave Menges

Hello, I have just noticed that LinBPQ sometimes prematurely exits. (I am unsure whether it is an issue related to KAM driver I added recently.) See the initialization of all ports, and later what fails ... Initialising Port 01 Telnet Server Initialising Port 02 SCS Pactor /dev/ttyUSB1 Initialising Port 03 TCPKISS IP 127.0.0.1 Port 8001 Chan A Initialising Port 04 UZ7HO Host 127.0.0.1 Port 8000 Chan A Initialising Port 05 UZ7HO Host 127.0.0.1 Port 8000 Chan B Initialising Port 06 KAM Pactor /dev/ttyUSB3 Using Shared Memory /BPQAPRSSharedMem Map APRS Shared Memory Allocated at 0x43000000 APRS Digi/Gateway Enabled Trying to start ./QtBPQAPRS Rig Control Enabled MQTT Enabled 0 Starting Chat Config File is /home/ham/linbpq/chatconfig.cfg Chat Started Starting Mail Config File is /home/ham/linbpq/linmail.cfg Config Processed Mail Started Using Shared Memory /BPQAPRSSharedMem Map APRS Shared Memory Allocated at 0x43000000 Shared Memory Size 3401584 Max 33554432 LinBPQ Configured with MaxStations 1000 APRSCall YU7BPQ SIGSEGV Received ./linbpq(+0x112e85)[0x523e85] linux-gate.so.1(__kernel_sigreturn+0x0)[0xb7f5a564] ./linbpq(+0x8ea71)[0x49fa71] ./linbpq(+0x8eb18)[0x49fb18] ./linbpq(+0x8eb18)[0x49fb18] ./linbpq(+0x8ea36)[0x49fa36] ./linbpq(+0x8d72e)[0x49e72e] ./linbpq(+0xca4a2)[0x4db4a2] ./linbpq(+0xcd77b)[0x4de77b] ./linbpq(main+0x1895)[0x525dde] Any idea? Misko YT7MPB

> I've uploaded new versions (6.0.24.71) to my Beta area and github. This should fix a problem with connects to the BBS causing a crash in some circumstances. There have also been a number of fixes to the INP3 code, so it you are using INP3 please check that it is still behaving as expected. 73, John

Hello all, I suspect the 3 reports below were all citing the same issue that wss fixed by the release posted yesterday at https://www.cantab.net/users/john.wiseman/Downloads/Test/pilinbpq /g/bpq32/message/43072 /g/bpq32/message/43125 /g/bpq32/message/43853 I think it's possible that the new release will resolve this one also, but time will tell. /g/bpq32/message/43455 Charlie N4NVD confirmed yesterday that it fixed his issue, and I can confirm that it has fixed mine. Thanks as always to John G8BPQ! 73, Lee K5DAT

Ok, so off on another fine tuning adventure - As it deals with aprs, does btext and btinterval play into the config? PORT PORTNUM=3 ID=QtSM APRS TYPE=ASYNC PROTOCOL=KISS IPADDR=127.0.0.1 TCPPORT=8001 ;BCALL=W9JUN-10 ;UNPROTO=APBPQ1 ;DIGIFLAG=1 CHANNEL=A MAXFRAME=4 FULLDUP=0 FRACK=4000 RESPTIME=3000 RETRIES=4 PACLEN=128 TXDELAY=500 TXTAIL=50 PERSIST=63 SLOTTIME=100 ENDPORT

I've uploaded a new verion of BPQ32/LinBPQ (.62) to my beta site and github. Main changes are fixing a bug in resequencing NETROM packet and adding compression of NETROM frames and an interface for the WhatsPac client. https://www.cantab.net/users/john.wiseman/Documents/L4Compression.html https://www.cantab.net/users/john.wiseman/Documents/WhatsPacInterface.html 73, John