开云体育

Good evening

?

I am using Direwolf with linbpq as an APRS setup. However, not seeing the inet stream in direwolf, nor are stations populating on the aprs map from the bpq server.

?

Here's what I have -

ISHost=rotate.aprs2.net ? ?; APRS-IS Host Name. May be either an IPV4 or an IPV6 Host
?ISPort=14580 ? ? ? ? ? ? ? ?; Normal port for a filtered feed
?ISPasscode=8334 ? ? ? ? ? ?; If you don't already have a passcode I can issue you one.
?;
?; You can specify a filter command to be sent when you log on to APRS-IS. Normally you don't
?; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it starts,
?; and if you aren't running an APRS application, there isn't much point in getting info from APRS-IS
?;
?ISFilter=m/64?
?;GateLocalDistance=0
?;GATEDPATH 3=APRS
?LOGAPRSIS=1

?

APRSDigi is not an APRS client per se, but if you start BPQAprs program I think you will get the results you are looking for. ?Works on Windows. ?Linux I can’t say.?

?

?

--

73,

Mark, N5MDT

Montgomery, Texas

?

?

?

I will give that a whirl