开云体育

I have the opportunity to update a local digipeater with a node (and maybe add a WAN frequency as well). Should I use BPQ for the node and if so, what type of hardware should I use for the node? 73, Eric WG3K FM18rp Packet: WG3K@WG3K.#SMD.MD.USA.NOAM E-Mail: wg3k@...

We were installing a new WL2KREPORT line and got the frequency wrong. Way wrong. Like, out of band wrong. I know Trimode has the ability to delete a frequency record from WL2K. Does anyone know how to send a delete command to remove that bad frequency? Using anything other than Trimode? Yeah, I know it will fall off by tomorrow but I'd rather get it off sooner. -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852

There is a new version (.69) of BPQ in my Beta area and github. Main changes are that NETROM links try to negotiate using SREJ on connection and BBS transfer restart data is saved to disk so it is still available after a restart. Full changelog is at https://www.cantab.net/users/john.wiseman/Documents/BetaChangeLog.html 73, John

Hi On my pi console at every incomming message i see Failed to run /home/claude/linbpq/MailNewMesg Or sometimes MailMsgRead What i have missing? Thanks Claude F4IKH

John is there any way to sort the routes display (html or terminal)? If not now, would it be an easy change? Maybe a line count? -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852

Greetings. There's what I believe is a connect script making a connection to my node that is evidently originating from N0HI's node in Colorado. It's attempting to connect outbound to KB9UNZ-7 on my VHF port. I have not been within VHF range of KB9UNZ-7 in nearly two years since moving further north, but curiously this started relatively recently. I left a message with Jess N0HI asking about it but never received a response. I can't say for certain if the script resides in his node, though. 15:23:38T N0HI-14>KB9UNZ-7 Port=1 <C C P> 15:23:46T N0HI-14>KB9UNZ-7 Port=1 <C C P> 15:23:54T N0HI-14>KB9UNZ-7 Port=1 <C C P> 15:24:01T N0HI-14>KB9UNZ-7 Port=1 <C C P> 15:24:08T N0HI-14>KB9UNZ-7 Port=1 <C C P> 15:24:15T N0HI-14>KB9UNZ-7 Port=1 <C C P> 15:24:23T N0HI-14>KB9UNZ-7 Port=1 <C C P> If there's anyone on here that is in contact with N0HI that can inquire about it, I would appreciate it. Also is there any way to block the incoming connection? When the above activity is present, I can see a circuit to N0HI-1. I don't have a direct link with N0HI-7, so I'm not sure which AXUDP link the incoming connection is using. My best guesses are the links with either KE0GB-7 or W9GM-7 as they both have direct links to N0HI-7. Normally I keep the VHF radio set on high power because stations in my area are relatively far away. These repeated attempts to reach a station that is well out of range are causing my power supply fan to turn on and run unnecessarily unless I turn the power setting down on the radio. Thanks and 73, Lee K5DAT

I am having issues with the audio levels for QtSoundmodem. and Direwolf so I dont think it is an issue with the software per se but the levels dont seem to stay static even after doing a alsactl store They show the values are the same but direwolf shows audio input low even though it was just fine the last time I ran it QtSoundmodem shows very little recv audio on the bar graph.. very confusing Here is a system report snippet of my audio system Audio: Device-1: Intel Alder Lake-N PCH High Definition Audio driver: N/A bus-ID: 00:1f.3 chip-ID: 8086:54c8 class-ID: 0403 Device-2: Zoran Personal Media Division (Nogatech) USB Audio and HID driver: snd-usb-audio type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 bus-ID: 1-6:4 chip-ID: 0573:1573 class-ID: 0300 serial: <filter> API: ALSA v: k6.8.0-55-generic status: kernel-api Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin Robert Cartier kd1jg@...

I'm looking for some HF Forwarding partners for NTS and Emergence traffic as it becomes necessary don't need any bulletins over HF. I have a full time 24/7 BPQ32 station setup and ready to rock and roll here in the lower part of Texas where it seems to be forgotten. If you are interested send your connect script to this station, I will put your callsign in my forwarding file for a connection. To connect to my station, you can find the listed frequencies on WL2K webpage.

John, Anyway to send the traffic reports to the bbs msg to the sysop, or view it as one of the files in the log files menu. Also is there a way to limit the number of reports that accumulate? TIA jim KI0BK

Hi List, Question, is there a way to export all the mail to a file. What I have is this. Forward Config for FILE Connect script FILE /home/pd9q/export/mail.out TO ALL WEER DX DXNEWS NEWS ALERT PIC ARCH LINUX TECH TODAY KEPS etc.... I there a way to select all, something like *.* or ALL Thanks, 73 Niels PD9Q

Hi Linux Wizards Trying to install QtTerm on Ubuntu 24.04 come up against a brick wall Not the greatest of instructions see below If you need to run on other Linux or similar systems you may be able to compile from source. Download http://www.cantab.net/users/john.wiseman/Downloads/QtTermSource.zip, unzip and run qmake then make A proper set of instructions would be nice Kevin G7UXW io83 NNNN

After setting up a new bbs partner, i tried the start forward from the drop down in the Actions tab, but nothing happened. Is this a known issue Add new user has been setup an flagged as bbs, Forwarding script has been setup, no times in script. Ray N3HYM

Hello group, Is there a way to make a beacon broadcast possible in FEC for advertising a PACTOR connect in BPQ? Something thought me to first search for a similar topic but couldn't find one. ;-) Best 73' Jan PA3GJX

Hi dear john I've tried using custom templates but I've found a few problems: the first: I load an image into my template with the following code <img src="{FormFolder}inc/logo_63.png" alt="Logo 63" width="60%" /> The text is converted into a url that seems correct but the image doesn't appear. If I copy/paste the link into the browser, the browser tries to save a file the second problem: When viewing a message with the template, the message is displayed in the template but the tag {FormFolder} is not interpreted and replaced by the required part of url These templates work perfectly with winlink express 1.7. Best 73s Claude F4IKH

On 250313 HAMGATEME/I @ HAMGATEME.N2NOV.#RICH.NY.USA.NOAM zip ? ME ? 73, Chuck

John, is there a way to add the port number from which a connection is made in the BBS log? If I had the ability to extract by port number it would help diagnose some things. For example, I would like to see the log for all my Vara connections, i.e. Port 5 and not all the AXIP port connections. So, just having the port number in there we can extract what we need through grep or whatever. Thanks -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852