开云体育

I've uploaded new versions of LinBPQ and BPQ32 to my Beta site and github. These should fix the problem with the Mail ISP Interface configuration. It also sorts the Routes lists and adds a prototype for an AXIP status page at /Node/AXIP.html in the management interface. 73, John On 13/03/2025 07:17, John G8BPQ via groups.io wrote: Thanks, Yes, I'll be doing the Linux version today. 73, John On 13/03/2025 01:17, louis rioux via groups.io wrote: Thanks John, Everything works again… great! Don’t forget to correct the Linux version too ? 73 Louis ve2nzr De : [email protected] <[email protected]> De la part de John G8BPQ via groups.io Envoyé : 12 mars 2025 17:22 ? : [email protected] Objet : Re: [bpq32] ISP Account Name replace by Signoff Message in the ISP Interface configuration Sorry, that is a bug I've recently introduced. I've uploaded a new BPQMail.exe to my Beta site that should fix it, but you'll need to re-input the ISP Host Name. 73, John On 12/03/2025 18:55, louis rioux via groups.io wrote: Hi to all, Want to know if other person has the same problem than me. I have “Mail Server Version 6.0.24.62” and “Console Version .0.24.65”. Can’t find both programs with the same version, but now when I start the BBS, the “Signoff Message” replace my “account Name” so I can’t transfer message from and to Internet. I use GMAIL with stunnel for that. Am I alone with this thing. Thanks, and 73 Louis ve2nzr

Hi to all, Want to know if other person has the same problem than me. I have “Mail Server Version 6.0.24.62” and “Console Version .0.24.65”. Can’t find both programs with the same version, but now when I start the BBS, the “Signoff Message” replace my “account Name” so I can’t transfer message from and to Internet. I use GMAIL with stunnel for that. Am I alone with this thing. Thanks, and 73 Louis ve2nzr

Can I use BPQ32 (linbpq) to gate tcpip over an AX.25 radio port? Thomas

All I might be looking for something that is a bit much. Is there anything available that I could use too import the BBSUSER section from the BPQMAIl.CFG file Or can I just take the BBSUSERS section and move it into the the file and then go back in and adjust any of the entries for SYSOP .. etc Just would be easier when bringing up a backup BBS to make sure there were no errors Thanks in advance Robert Cartier kd1jg@...

Correction - this is in Windows 10.

What commands are available that I can send to a VARA port I see BWXXXX is accepted but that about a freq change or anything else or does that need to be done outside of the vara connection While I am scanning through BPQ Rigcontol that is fine but I need to be able to do a forwarding and choose the frequency based on the time of day when I know propagation would be better on a know set of frequencies would like to use either a memory channel on a 7300 or be able to change the frequency and set the radio to USB-D (Data mode) THanks in advance Rob

Hi all, I have WinRPR running on my linBPQ Linux machine, but just can't get it to engage transmit. It shows it's transmitting in the waterfall, but the radio won't actually transmit. VARA HF works fine. I have INTERLOCK=1 in the WinRPR radio port as well as in the VARA HF port. Below is the WinRPR port and below that the VARA HF port. I have the RIGCONTROL line and PTT CI-V both disabled and enabled, but I don't think I need them enabled since INTERLOCK=1 is enabled. My VARA HF port has all the RIGCONTROL and PTT config enabled and working with my IC-756Pro. LinBPQ version is 6.0.24.45. Any help greatly appreciated, 73. PORT PORTNUM=7 TYPE=EXTERNAL INTERLOCK=1 ID=WinRPR DRIVER=KISSHF PORTCALL=KP3FT-12 CONFIG ADDR 127.0.0.1 8009 ; PTT CI-V ; RIGCONTROL /dev/ttyUSB0 19200 ICOM IC756PRO 5C DEFAULT ROBUST ; Default mode is RP %F 2000 ; Centre Freq for Normal Packet %B R300 ; Robust ENDPORT PORT PORTNUM=4 ID=VARA-HF 40m/80m DRIVER=VARA INTERLOCK=1 CONFIG ADDR 127.0.0.1 8300 PTT CI-V MYCALLS KP3FT-2 KP3FT-3 KP3FT-4 KP3FT-6 KP3FT-10 BW500 BUSYWAIT 2 RIGCONTROL /dev/ttyUSB0 19200 ICOM IC756PRO 5C 5,7.1032,USB 02:00 5,3.596,USB 13:00 5,7.1032,USB **** ENDPORT

Could someone please share the proper settings in the various versions of BPQ to stop these messages from going out regarding WhitePages? WP handling is supposed to be a behind-the-scenes process that does not need any handling by the sysop. "Your Message ID C8RJ_N2NOV Subject WP Update to WP has not been read for 30 days. Message had been deleted." -- Charles J. Hargrove - N2NOV NYC-ARECS/RACES Citywide Radio Officer/Skywarn Coord. NYC-ARECS/RACES Nets 441.100/136.5 PL ARnewsline Broadcast Mon. @ 8:00PM NYC-ARECS Weekly Net Mon. @ 8:30PM http://www.nyc-arecs.org NY-NBEMS Net Saturdays @ 10AM & USeast-NBEMS Net Wednesdays @ 7PM on 7.036 Mhz USB (alt 3.536)/1500 hz waterfall spot; MFSK-16 or 32 "Information is the oxygen of the modern age. It seeps through the walls topped by barbed wire, it wafts across the electrified borders." - Ronald Reagan "The more corrupt the state, the more it legislates." - Tacitus "Molann an obair an fear" - Irish Saying (The work praises the man.) "No matter how big and powerful government gets, and the many services it provides, it can never take the place of volunteers." - Ronald Reagan

Hello, I wan to use the PTTMUX option in Rig Control, but WinRPR doesn't see either of the virtual com ports created by com0com. Setup is linbpq talking to WinRPR across the LAN. Any ideas? Thanks, Lee K5DAT

I manually pickup messages from an area DTN hub using BPQMail and would like to go back to a set frequency after forwarding so they can find me when sending traffic to me. I saw a reference to the parameter DefaultRXFrequency xx.xxx but no reference if this still works or where to put it the port config file. Can someone help me reset my radio after forwarding to a set frequency? Thanks Dave - KD7UM

When setting up the timing for mail forwarding/ reverse, what is the max value that can be entered into the fields for these settings (seconds). BTW minutes seem to me as a better value rather than seconds. the reason I ask is I want to poll for DTN traffic only 2 to 4 times a day, but those values are large when expressed as seconds. TIA jim

Hello Could someone point me to the right display control codes for triggering and displaying in the teletext window. The closest thing I can find so far are the prestel control codes and I have only been able to produce colored text with those. Thanks in advance Joey

I am trying to work out a way to send from winlink express to bpqmail thru telnet on the localhost I need to generate outgoing messages to a group and winlink express seems to handle this the best from what I can see SO with that being said instead I saw on winlink express under telnet session - settings there is a way to use the local machine as a RMS Relay. So I am assuming that I need to set CMS=1 on the BPQ32.cfg port definition but beyond that I am lost and dont see where to establish the rms relay to listen on 8772 I could also be all wet and not understanding the pipe any guidance is welcome Rob

I was curious if there is a way that I can have a message posted to the BBS and have it rewritten so I can send out a defined list of rms express users individually. I was looking thru the system and havent come across a rewrite window i will continue to look The system is currently a closed system and not out on the public network so I am not too concerned for outside users flooding my user community Thanks in advance

This morning I accessed BPQ Mail from a terminal window on the bpq host machine. Windows 10. BPQ32 6.0.24.64 and BPQMail 6.0.24.62 (these were distributed together.) Anything that I enter (LM, L, name, homebbs, anything) returns nothing to the terminal. I can see that it connects to the BBS on the mail app, and the queue value goes to what looks to be accurate. But nothing on the screen. Accessing WebMail in a browser works normal. Accessing the BBS from a browser terminal acts normal. Accessing the BBS from another machin using telnet works normally. The logs show exactly what the terminal does. No output to the terminal when accessed with a terminal window on the local machine. I looked for all occurrances of my base call sign in my config. I do have a couple and commented them out. Restarted and the same happens. Forwarding is happening normally. Recieving mail is happening normally. Anyone else have this happen to them? I probably have not accessed the BBS like this for months so have no clue when it started. So many changes to the config file since I accessed the mail from a termina... Just not sure if this is isolated to my fat finguring the config file somewhere or if others have seen this. Quite frankly, I don't even know where to start looking. -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852

I have been experimenting with the bridge functionality on a linbpq system. The test bridge system has only 1 telnet port (so I can use QTT for testing) and 2 RF ports defined. The 2 RF ports (10m and 70cm) are bridged and for testing purposes are configured for 1200b with a maxframe of 3 and a paclen of 128. The bridge functionality is working but with one odd behavior. Both RF ports use QTSM 1200b ax25 no fx and no il2p. I can connect on either the 10m port or the 70cm port to the bridge system directly as a node and issue a command that will generate a bunch of output like the status command and both ports behave as I would expect. By that I mean I can monitor the ax25 packets and see the bridge system send 3 frames (MAXFRAME=3) and the connected system respond as it should with a single ACK. The bridge node sends the next 3 frames which is again ACK'd by the connected system with a single frame and so on until there is no remaining data to send. The bridge is active the entire time but in this test is not providing anything useful since I connected to the bridge system directly as a node specifically to verify that AX25 packet timing was acceptable on both RF ports given PERSIST and SLOTTIME settings. Both RF ports behaved well and I did not witness a single retry. If I instead connect .eg. from a system on 10m "through the bridge" to a linbpq node on the 70cm side of the bridge the ax25 traffic is nicely bridged in both directions but now there is the odd to me behavior observed. With small bits of data that do not require more than a single frame the bridge works very well. If however there is a large block of data like the output from a BPQ status command and both RF ports are trying to do the MAXFRAME=3 thing the timing goes bonkers and there are lots of retries that slow down the transfers significantly. Short of forcing MAXFRAME=1 on the bridge ports is there anything I can do so that the bridge function does not muck so much with the packet timing? 73 de Rich WA3WLH

I am configuring linbpq on a Pi Zero W, when it was installed the default config BPQ was running so I started to configure it. After the reboot in didn't have BPQ available and I am seeing the following error: $ systemctl status linbpq.service ● linbpq.service Loaded: loaded (/etc/systemd/system/linbpq.service; enabled; vendor preset: enabled) Active: failed (Result: start-limit-hit) since Tue 2025-03-04 12:35:30 AST; 3h 20min ago Process: 621 ExecStart=/bin/bash /home/pi/linbpq/runbpq (code=exited, status=0/SUCCESS) Main PID: 621 (code=exited, status=0/SUCCESS) CPU: 115ms Mar 04 12:35:30 M1DOG systemd[1]: linbpq.service: Scheduled restart job, restart counter is at 5. Mar 04 12:35:30 M1DOG systemd[1]: Stopped linbpq.service. Mar 04 12:35:30 M1DOG systemd[1]: linbpq.service: Start request repeated too quickly. Mar 04 12:35:30 M1DOG systemd[1]: linbpq.service: Failed with result 'start-limit-hit'. Mar 04 12:35:30 M1DOG systemd[1]: Failed to start linbpq.service. I was using linbpq 6.0.24.65 upgrade it to 6.0.24.66 but the same result. Any help would be appriciated. Heber NP4JN

I'm experimenting with one of my BPQ32 nodes. I need advice on how to MAP through a T-Mobile Arcadyan KVD21 Gateway. For only $35/mo it's a great way to provide internet service at almost any location - especially remote node sites. https://www.t-mobile.com/support/home-internet/arcadyan-gateway 1st experiment: MAP from my existing -7 node at the Arts Center to my -5 node at my house. I’ve been able to identify the IP address for the can and have had some success using the following format. (x's being the IP addresses) on -5: MAP WW2BSA-7 xxxxxxxxxxxx TCP-Master at the Arts Center: MAP WW2BSA-5 xxxxxxxxxxxxxxx TCP-Slave But before I go into a lengthy post with more details, I wanted to first see how other Sysops have configured their MAP statements with a T-mobile, Verizon, etc. internet “can” if they use one. 73 de Chris ww2bsa

Whereabouts in the file is it? It needs to go in a port config. If that's not the problem send me your config and I'll have a look. 73, John