开云体育

Hi Danny, Yes I think so, I am no master of networking so treat me like a beginner These are the structions I used.. root@gb7esc:~# sysctl -w net.ipv4.ip_forward=1 net.ipv4.ip_forward =

hi Alan, do you have ip_forwarding enabled ? i run debian and lin bpq

I know it well. How are the Seasiders doing this season? (I'm G7LTT in another life). So here's the thing, ideally you want an IP range that will fit in with your local RF LAN. So connecting to a US

Good Evening Mark, I am in the UK GB Blackpool check QRZ for G0WDA The? simple way would be good, I HOPE :) All the best and thank you from Alan

There are many ways to skin this party at. The easiest by far is to get a Wire guard VPN connection. Where are you located? There's a project called "HamGate" operating in 13 East Coast States. Maybe

Good Evening Everyone I have? a pc with Debain 12 OS and bpq32 configured with a gateway The problem is I cannot talk to the 44.x.x.x network,? even though I have a 44 address I was told I needed

Error 98 means port in use. You could be using port 8080 in some other software or you could have two copies of LinBPQ running. Using SSID -10 for Winlink is the usual convention? but isn't

When running screen -r bpq I get the following error.? Seems to be an incorrect port setting (comes up by default in linBPQ Config Generator). Also, you need to use CALLSIGN-10, if you are going to

Unless you create a symlink com4 has no meaning on Linux. On Linux use DEVICE=/dev/ttyUSB3. This is similar to what you have in the config for the SCS? port. 73, John

Hi, Eric: If this is a single radio digipeater, I recommend keeping it as a digipeater only and not a node. If this station will have more than 1 radio, then a node could be of benefit. If you use

Hi all, I just added a new Kantronics KAM XL to the modem/interface set I have already run with LinBPQ. The KAM is wired as a forth one device, /dev/ttyUSB3 (COM4). But BPQ fails to initialize

We were installing a new WL2KREPORT line and got the frequency wrong. Way wrong. Like, out of band wrong. I know Trimode has the ability to delete a frequency record from WL2K.? Does anyone know how

Updated. Thanks for great software. :-) 73 Em sáb., 29 de mar. de 2025, 11:12, John G8BPQ via groups.io <john.wiseman= [email protected]> escreveu:

There is a new version (.69) of BPQ in my Beta area and github. Main changes are that NETROM links try to negotiate using SREJ on connection and BBS transfer restart data is saved to disk so it is

I sat up a LinBPQ node a year ago with a Raspberry Pi 4 and Direwolf for VHF Packet. Eventually it will have a Winlink RMS but Internet is slow to show up. I also used the small UPS in the following

Hi Lee yes I just received that info from Del Kaopnd in Iowa.. looks promising! Hope to see you on the systems soon george in Dubuque Iowa n9pno

What hardware is there now.? Can you use that? -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852

I run BPQ32 on a windows netbook, with a dra 50 sound mode. That supports both packet digipeater an netrom node an VARA FM for digipeating to my system from Gambill Mountain State Park. Ray

I have the opportunity to update a local digipeater with a node (and maybe add a WAN frequency as well). Should I use BPQ for the node and if so, what type of hardware should I use for the

Hello John Many thanks Now it is good Best 73s Claude F4IKH [email protected]> a écrit :