开云体育

I installed the latest installer and then installed the latest DLL. My web interface for the mail (BBS) went away. I reinstalled again and I am back to normal, but running the 6.0.24.1 version. I

Pretty sure that refers to pure ASCII vs unicode. Jim KA7EHK

Works fine. I'm not sure that I understand the GPIO terminology or if the GUI needs an update. I was designating the physical pin and it turns out that it is the GPIO Port number (GPIO 25 on pin 22).

@John G8BPQ: Sorry, what do you mean with 'right codeset' please? I copy the ASCII from above right into the bpq32.cfg, for reference the TEXT looks like this. ...snip... CTEXT: Willkommen in der

@Mauro: Good see, but that was my fault. in real World there are 3 Asterisks. BBS is up and running with plane CTEXT without any issues. Thank you 73

Thanks, I'll give it another look. -- Dave Menges

ASCII art should work so long as you have the right codeset, but you can't use \nnn to set control characters. 73, John

Yes, it should. You can select GPIO in the PTT setup. I haven't tried it for a while so would be interested to hear if it still works. 73, John

Hi Tom. It seems to me that you are ending the CTEXT with four asterisks (****) instead of three (***). I have already made ascii art in CTEXT and it worked fine. Em qui., 9 de jan. de 2025, 12:29,

I've run QTsoundmodem on a Pi 4 and a Signalink without problems. Does it support GPIO? I've not gotten it to work with a hat that I use with Direwolf. Thought I would ask before I spin my wheels too

After a streesfull week with a steep learning courve my LinBBQ is running and I even got ZORK and WORDL up and running. Now, I thought it was time to meake it pretty and wanted to Add soem collor to

I received a few private messages about dropping the WW in addition to this thread.? This has solved the issue and it's no longer going to SMTP: (which I saw on one other occasion after changing some

You don't need the WW on the end, but it shouldn't cause the message being sent to Winlink, so it sounds like a bug. I'll look into it, but as Eric says removing the WW should stop it. 73, John G8BPQ

The addresses shouldn't have .WW on the end. BPQ is thinking these messages should be routed through Winlink and is adding the RMS: part. Remove .WW from your addresses and from the h-route of the

Happy new year to everyone! New BPQ32 user here, latest version.? Running RMS, Chat, and Mail. A group of hams and myself are attempting to set up forwarding between our individual nodes. Ham #1

Good eyes, Charles.Typoww2bsa@... we go....73 de Chris

There should be a period and not a comma between fields. -- Charles J. Hargrove - N2NOV NYC-ARECS/RACES Citywide Radio Officer/Skywarn Coord. NYC-ARECS/RACES Nets 441.100/136.5 PL ARnewsline Broadcast

Although I posted to SYSOPS in the US, I thought I'd mention it here n Groups.io It seems someone has altered my white page address. It is *NOT* ww2bsa@ww2bsa.#nj.usa.noam My address is:

Not sure if this helps but for more info: ``` n9seo@debian:~$ ls -lah bpq/Mail/m_030725.mes -rw-r--r-- 1 n9seo n9seo 73K Jan 6 17:07 bpq/Mail/m_030725.mes ```

Hi is there some limitation on the max size of a NNTP pull from BPQ with claws? A recent bull sent to BBS@WW with bbs list is ~ 70K. When I try to view it in claws, I get the following on