开云体育

Winelink is a GitHub project that installs Wine, then Winlink and VARA for you. You can then point a BPQ port at the VARA interface.

Hi, sparks: Neither. 73, Chuck

I’m confused. please clarify something here. You mentioned “WineLink" several times, is that a typo for Winlink? or Wine (a tool for Macs) … . I’m running R-Pi with BPQ via a homebrew

Just an update; I now have QTsoundmodem working on PILINBPQ with USB Signalink. Thank you to John G8BPQ and Lee K5DAT Thank you gentlemen; it works very well. Brett KB5YZB

The version I’m using (I’m sure which at the moment) does the same Charlie. Must be in the code that way now. Tim - KF5RLL

Hello folks, Thought to contribute to the group with a recent success of getting a RPI to take over doing all of the things at once on one audio interface including VARA running simultaneously as

bpq32 console, windows, beacon config? ?<<<? windows version of bpq32 or bpq mail server window, configuration Ray N3HYM

Lee, I'im 100% operational. all ports are working. Thank you!!!! Brett

OK, that's the issue. Given you are using a Signalink, it handles the PTT using its own VOX circuit, so QTSM doesn't need a PTT setting. If it is set to use USB0 then it is interfering with what I

Thanks Lee, I think its a USB conflict not a port in BPQ. I did test the RFI theory; as I stsrted the pi adn BPQ and after the QTSM without a transmit, it still block the BPQ from communicating with

Thank you, John.? That's how we'll roll.

On Fri, Jun 10, 2022 at 12:17 AM, John G8BPQ wrote: > > There was a bug which meant that connecting to the application defined by > the 4th parameter didn't work with QtTermTCP or the Web Terminal.

Brett, If you are starting QtSoundModem remotely from Windows via PuTTY you will need to use the nogui option e.g. "piQtSoundModem nogui" or "QtSoundModem nogui". It wasn't clear if you got things

The very radio I have too. I do love the radio. Was you very sensitive to noise? I have a TS2000 tight next to it, which is the reason I trying to get the qtsound modem to work, and it very

Thanks Perry. Its working now with John's instructions using alsamixer. You're right, I just had to tweak the audio to key the SL-Radio. However now I have a port conflict? with KAM and Signal

I had a KAM XL on a TS-480HX many moons back and think I had the audio at 1 or 2 in the menu. It's been too long to remember exactly though. Perry K4PWO Sent from my T-Mobile 4G LTE Device Get Outlook

The Signalink USB uses internal VOX keying. Your audio level of the Signalink's internal sound device must be set high enough to trigger the VOX. If you have CAT control of the radio, you'd be better

Thanks, the radio is a Kenwood ts480, so you are right the audio levels can be off as the menu allows a rang from 1-8. I think the norm is "3" . Brett KB5YZB

All audio is handled in the KAM so the Pi only sees serial data decoded by the KAM. Look at your KAM manual to adjust audio levels. You may be swamping the KAM with excess audio from the radio. Perry

John, can alsamixer be used to increase the input audio from KAM plus (using serial/USB connection)? the reason I ask is, on HF i sometimes find my Mark and Space lights are solid from a HF station,