¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Bpq32
  2. Messages
Expanded Topics Messages
Date
Re: MHEARD List

 


On Wed, Apr 9, 2025 at 12:51?PM Alan via <alan=[email protected]> wrote:
Hi John,
?
? No the picture shows port 11 working and being listed
? Port 1 shows nothing
?
? Port 1 VHF Port
? Port 11 AXIP
? Port 12 Telnet
?
That is all I have...
?
All the best from Alan

By chance did you restart BPQ since the VHF stations were heard? I always lose the MH list after a restart.

73,
Lee K5DAT
?
Re: MHEARD List

 

¿ªÔÆÌåÓý

OK, Alan. Running out of ideas.

If you like you could send me your config and I'll try running it here.

73,
John

On 09/04/2025 18:51, Alan wrote:

Hi John,
?
? No the picture shows port 11 working and being listed
? Port 1 shows nothing
?
? Port 1 VHF Port
? Port 11 AXIP
? Port 12 Telnet
?
That is all I have...
?
All the best from Alan
Re: MHEARD List

 

Hi John,
?
? No the picture shows port 11 working and being listed
? Port 1 shows nothing
?
? Port 1 VHF Port
? Port 11 AXIP
? Port 12 Telnet
?
That is all I have...
?
All the best from Alan
Re: MHEARD List

 

¿ªÔÆÌåÓý

That is monitoring port 11.

Have you got PORTNUM=11 instead of PORTNUM=1 in config?

if so, try MH 11


73, John



On 09/04/2025 17:28, Alan wrote:
Re: MHEARD List

 

Hi John,
?
? Missed half your question, if i use MH 5 which I dont have
? it comes up with Invalid Port
?
All the best from Alan
?
?
?
Re: MHEARD List

 

Re: MHEARD List

 

¿ªÔÆÌåÓý

Do other commands (eg ports) work?

If you do MH with an invalid port do you get an error message?

73, John

On 09/04/2025 16:37, Alan wrote:

Hi Steve,
?
Port 1 is the 2m VHF Port, had a few people come in on that port
But when you do MH 1 you get nothing not even a hearder
?
All the best from Alan
Re: MHEARD List

 

On Wed, Apr 9, 2025 at 04:16 PM, John G8BPQ wrote:
I assume it returns a header but no entries, eg

NOTTM:GB7NOT-2} Heard List for Port 1
Hi John, if what you are showing me is a header, then yes
but that is all, I am operating in SIMPLE mode...
?
All the best from Alan
Re: MHEARD List

 

On Wed, Apr 9, 2025 at 02:58 PM, Chuck Gelm wrote:
Not required for [email protected], but helpful for my brain.
I would like to assume I am communicating with an licensed Amateur Radio operator.
:-|
Hi Chuck, yes you are my call sign is G0WDA on qrz, my website is g0wda.co.uk
?
All the best from Alan
Re: MHEARD List

 

On Wed, Apr 9, 2025 at 02:52 PM, Steve G7TAJ wrote:
Head to packetmap.extra.tools:600
Hi Steve I presume this is a website, but for me it brings nothing up...
?
?
All the best from Alan
Re: MHEARD List

 

Hi Steve,
?
Port 1 is the 2m VHF Port, had a few people come in on that port
But when you do MH 1 you get nothing not even a hearder
?
All the best from Alan
Re: MHEARD List

 

¿ªÔÆÌåÓý

I assume it returns a header but no entries, eg

NOTTM:GB7NOT-2} Heard List for Port 1

Most likely either Port 1 is a Telnet Port or an RF/AXIP Port that hasn't actually heard anything.

73, John G8BPQ




On 09/04/2025 10:57, Alan wrote:

Good Morning everyone,
?
? I using the command MH 1, but it returns nothing
?
? Is there a logging function I have missed
?
All the best from Alan
Re: MHEARD List

 

On 4/9/25 07:59, Alan wrote:
Hi Chuck, no problem, did not know you should have a callsign email
for this group.
All the best from? Alan
Hi, Alan:

Not required for [email protected], but helpful for my brain.
I would like to assume I am communicating with an licensed Amateur Radio operator.
:-|

73, Chuck
Re: MHEARD List

 

Alan
What type of port is port 1?
If AXUDP make sure there is MHEARD in the CONFIG section of that port in BPQ32.cfg

Also, are you aware if the OARC discord and UK packet map? ESC is not there currently. Add to your general config ENABLEM0LTEMAP=1

Then restart BPQ switch.

Head to packetmap.extra.tools:600

73
Steve?

On Wed, 9 Apr 2025, 10:57 Alan via , <alan=[email protected]> wrote:
Good Morning everyone,
?
? I using the command MH 1, but it returns nothing
?
? Is there a logging function I have missed
?
All the best from Alan
Ohio Packet Hub Allstar

 

Good morning all.
?
Matt KB8UVN has an allstar node called Ohio Packet Hub 510810. I have teamed up with him and connected my Allstar node and ADN DMR Network together. The TG on the ADN Network is 31395. I am passing this information along. In the hopes that we can get some voice traffic about packet, Vara, BPQ, etc. Give you a place to talk about it instead of waiting for an email reply. Sometimes you can get things resolved fast by voice than over email.
?
Any issues, concerns or problems. Please let me know.
?
Ryan
?
My ADN Server is .
Re: MHEARD List

 

Hi Chuck, no problem, did not know you should have a callsign email
for this group.
?
All the best from? Alan
Re: MHEARD List

 

On 4/9/25 06:53, Alan wrote:
MAP GB7ESC ESCBBS UDP 10093
Oh, my, I thought you were my neighbor Alan in Ohio, USA.
Your callsign is not in your email address.

Silly me.
Sorry.

73, Chuck
Re: MHEARD List

 

I presume you need this chuck MAP GB7ESC ESCBBS UDP 10093
Re: MHEARD List

 

Hi Chuck,
?
?Thank you for the reply, please remember I am new to all this my knowledge is minimal :)
?
?I have added MAP NC8Q nc8q-bpq UDP 10093 B
?
What do you need from me :)
?
All the best from Alan
Re: MHEARD List

 

On 4/9/25 05:57, Alan wrote:
Good Morning everyone,
? I using the command MH 1, but it returns nothing
? Is there a logging function I have missed
All the best from Alan
Hi, alan:

Dunno.
Let's MAP our NODEs/BBSs so that I can issue a PORTS command on your NODE.

You can add
MAP NC8Q nc8q-bpq UDP 10093 B
in the PORT
?ID=AXIP Link
?DRIVER=BPQAXIP
section of your bpq32.cfg
-----

Shall I use

MAP N8WQ nc8q-bpq UDP 10093 B

for my MAP to you?

73, Chuck
281 - 300 of 43646