Probably because you cannot use your node call as your aprs call.
?
Other comment:? In the US it is considerd bad form to digipeat on HF. Especially using that path.? I don't know what is widely accepted in VK land.
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Hi,
?
I my APRS ports are not digipeating.? ?I wonder if I have this config correct?
?
;-------------APRSDIGI------------------
APRSDIGI
APRSCALL=VK2NA-11
StatusMsg=G/D R-I HX
Symbol=&
Symset=I
APRSPath 4=APRS,WIDE1-1,WIDE2-1
APRSPath=5=APRS,WIDE1-1,WIDE2-1
GATEDPATH=4,APRS
BeaconInterval=10
MAXAGE=120
Digimap 4=4,IS
Digimap 5=5,IS
;TraceCalls=WIDE,TRACE
;FloodCalls=NA
DigiCalls=WIDE2-1,
ReplaceDigiCalls
MaxTraceHops=2
MaxFloodHops=2
MaxAge=30
BeacontoIS=1
LAT=3258.12S
LON=15140.94E
ISHost=sydney.aprs2.net
ISPort=14580
ISPasscode=*
ISFilter=m/50 u/RPR*
; ISFilter=m/50 u/APBPQ*
***
|
Re: Tracker and KISS Port Query.
IOADDR shouldn't be used. Just COMPORT
73,
John
?
On 19/02/2025 00:41, David VK2NA via
groups.io wrote:
toggle quoted message
Show quoted text
Hi.? I have a working KISS port Query.??
?
Here's part of my PORT entry.??
?
PORT
?PORTNUM=4
?ID=/dev/ttyUSB1
?TYPE=ASYNC
?PROTOCOL=KISS
?KISSOPTIONS=TRACKER
?FULLDUP=0
?COMPORT=/dev/ttyUSB1
?IOADDR=1F40 ;?for port 8000
?SPEED=38400
?PERSIST=64
?SLOTTIME=100
?
1) I have query about the IOADDR.? ?My Hex address is set for
PORT:8000 Is this entry necessary or correct?? The Tracker goes
into kiss mode and works but I am unable to connect to the port
via PCIPaddress:8000 - I am not sure if I have
understood the need for the IOADDR?
?
2) I assume it is not possible to change the BAUD from 300 to
R600 from a terminal application?? Can I add the BAUD in the
config, or do I need to return the Tracker to TRConfig on
Windows to do that?
?
Cheers,
?
David?
?
?
|
Re: Tracker and KISS Port Query.
Hrmm if your tracker is on a serial port, then I think IOADDR is moot.
The IOADDR here is for mostly kiss over TCP.
Second, on the tracker, not sure if you're a teensy tracker or an official, but I think that its the same. If you want to force robust baud, do it before you set the modem into kiss mode.
|
Thanks Mark,
???? I did not notice that, I have unmark the BBS, let see now if
this do any changes.
Jean
On 2025-02-19 09:34, Mark Taylor via
groups.io wrote:
toggle quoted message
Show quoted text
|
Probably unrelated but you cannot have BBS and RMS Express User both checked.
Is VA2OM really a bbs?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
|
|
Do you also have this checked?
Send System Msgs to SYSOP Call
?
And you should have a user record for VA2OM with "Include Sysop Messages in LM" checked.
?
You should then get everything at VA2OM.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Hi John,
?????? I have posted this message few months agoo, got replies
about Jnso and FBB but nothing about LinBPQ.
is that a way to have messages address to sysop to be redirected
to a specific call?
I have this in my config:
bout does not appear to work.
73 de Jean
VA2OM / VE2PKT
On 2024-12-08 17:15, Jean L¨¦tourneau
via groups.io wrote:
toggle quoted message
Show quoted text
Good
day group,
?? Is there a way for the messages addressed to sysop to be sent
to a specific call?
the call has Include SYSOP msgs in LM, but sometime I use a
different program to get my messages,
which download only msg for my call...
|
Re: BPQMAIL crashes after upgrade of BPQ32 to 6.0.24.62
Great!
Thanks for letting me know.
73, John
toggle quoted message
Show quoted text
On 19/02/2025 11:28, Marco Di Martino wrote: Hi John,
it's in testing right now.
It seems to be stable. No crashes so far.
Thanks a lot for your swift intervention.
73 de iw2ohx
Marco
Il 2025-02-18 21:08 John G8BPQ via groups.io ha scritto:
I think I've found the problem.
The problem is in bpq32.dll so reverting bpqmail.exe wouldn't help .54
of bpq32.dll should have worked.
Can you try this:
Thanks,
John
On 18/02/2025 13:19, Marco Di Martino wrote:
Hi John,
I do agree there's a corrupted file :)
You can download the archive file here:
Thanks!
Marco
iw2ohx
Il 2025-02-18 13:27 John G8BPQ via groups.io ha scritto:
This suggests a corrupt configuration.
Can you send me your BPQMail.cfg and I'll have a look?
Or maybe just zip and send your whole bpq32 data tree and I'll run it
under the debugger. But that is likely to be too big to send via
email.
73,
John
On 18/02/2025 11:32, Marco Di Martino wrote:
Hi John,
I'm still stuck with this issue.
I have also tried to revert back to BPQMAIL 6.0.24.54, but still the
BPQMAIL crashes after approximately 10 seconds.
I really don't want to downgrade the BPQ32 to a previous version
since we just saw the benefits of implementing the WhatsPac
application.
What can I do the better investigate the problem ?
Thanks.
73 de IW2OHX
Op. Marco
Links:
------
[1] /g/bpq32/message/43178
[2] /mt/111231697/145749
[3] /g/bpq32/post
[4] /g/bpq32/editsub/145749
[5] /g/bpq32/leave/4754036/145749/1579835809/xyzzy
|
Re: BPQMAIL crashes after upgrade of BPQ32 to 6.0.24.62
Hi John,
it's in testing right now.
It seems to be stable. No crashes so far.
Thanks a lot for your swift intervention.
73 de iw2ohx
Marco
toggle quoted message
Show quoted text
Il 2025-02-18 21:08 John G8BPQ via groups.io ha scritto: I think I've found the problem.
The problem is in bpq32.dll so reverting bpqmail.exe wouldn't help .54
of bpq32.dll should have worked.
Can you try this:
Thanks,
John
On 18/02/2025 13:19, Marco Di Martino wrote:
Hi John,
I do agree there's a corrupted file :)
You can download the archive file here:
Thanks!
Marco
iw2ohx
Il 2025-02-18 13:27 John G8BPQ via groups.io ha scritto:
This suggests a corrupt configuration.
Can you send me your BPQMail.cfg and I'll have a look?
Or maybe just zip and send your whole bpq32 data tree and I'll run it
under the debugger. But that is likely to be too big to send via
email.
73,
John
On 18/02/2025 11:32, Marco Di Martino wrote:
Hi John,
I'm still stuck with this issue.
I have also tried to revert back to BPQMAIL 6.0.24.54, but still the
BPQMAIL crashes after approximately 10 seconds.
I really don't want to downgrade the BPQ32 to a previous version
since we just saw the benefits of implementing the WhatsPac
application.
What can I do the better investigate the problem ?
Thanks.
73 de IW2OHX
Op. Marco Links:
------
[1] /g/bpq32/message/43178
[2] /mt/111231697/145749
[3] /g/bpq32/post
[4] /g/bpq32/editsub/145749
[5] /g/bpq32/leave/4754036/145749/1579835809/xyzzy
|
Tracker and KISS Port Query.
Hi.? I have a working KISS port Query.??
?
Here's part of my PORT entry.??
?
PORT
?PORTNUM=4
?ID=/dev/ttyUSB1
?TYPE=ASYNC
?PROTOCOL=KISS
?KISSOPTIONS=TRACKER
?FULLDUP=0
?COMPORT=/dev/ttyUSB1
?IOADDR=1F40 ;?for port 8000
?SPEED=38400
?PERSIST=64
?SLOTTIME=100
?
1) I have query about the IOADDR.? ?My Hex address is set for PORT:8000 Is this entry necessary or correct?? The Tracker goes into kiss mode and works but I am unable to connect to the port via PCIPaddress:8000 - I am not sure if I have understood the need for the IOADDR?
?
2) I assume it is not possible to change the BAUD from 300 to R600 from a terminal application?? Can I add the BAUD in the config, or do I need to return the Tracker to TRConfig on Windows to do that?
?
Cheers,
?
David?
?
?
|
Changing IF Filter during forwarding connect script
Does anyone know how to change the Icom IF filter within a forward script?
?
The Rigcontrol scan line options include the filter data, and the filter is applied when scanning.? But, when the forward script is initiated the filter applied at the time is the filter used.? If the script just happen to initiate at the time a scanned frequency with the filter is being scaned the filter remains applied.
?
?
Or, change the filter in a terminal session after you attach to a port.
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Re: Question on RELAYAPP=BBS
Yes, that should work.
73,
JOhn
On 18/02/2025 20:23, Mark Taylor wrote:
toggle quoted message
Show quoted text
On Tue, Feb 18, 2025 at 02:12 PM, John G8BPQ wrote:
The messages are queued to BBS RMS which needs Use
B2 set.
Ok, I have an existing RMS user in my BBS.? The messages are
queued to that user?? So, the forwarding is presently just the
characters "RMS"
?
I can change the script that looks like:
?
ATTACH 4
NOFALLBACK
C CMS
else
att 5
RADIO 10.1465
BW2300
c N5TW
?
?
Like that?
?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Re: Question on RELAYAPP=BBS
On Tue, Feb 18, 2025 at 02:12 PM, John G8BPQ wrote:
The messages are queued to BBS RMS which needs Use B2 set.
Ok, I have an existing RMS user in my BBS.? The messages are queued to that user?? So, the forwarding is presently just the characters "RMS"
?
I can change the script that looks like:
?
ATTACH 4
NOFALLBACK
C CMS
else
att 5
RADIO 10.1465
BW2300
c N5TW
?
?
Like that?
?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Re: Question on RELAYAPP=BBS
That should work. The messages are queued to BBS RMS which needs Use
B2 set.
In the forwarding script for BBS RMS connect to the RMS call of the
station that has a working CMS connection.
73,
JOhn
?
On 18/02/2025 16:05, Mark Taylor wrote:
toggle quoted message
Show quoted text
John (or anyone), is there a way to designate a user as a
preferred RMS Gateway?
?
If the internet is down, and,
When you have FALLBACKTORELAY and RELAYAPP=BBS set,? BPQ
could then automatically queue messages to that user and forward
over HF.? (with the proper forward script, of course.)
?
?
Can this already be done automatically?? Looking at the
docs---
RMS Relay Emulation
This allows BPQ to provide similar facilities to RMS Relay.
If you run an RMS application with fall-back to RMS Relay set,
but run RELAYAPPL=BBS instead of RMS Relay, when the Internet
is down messages are diverted to the BBS, from where they can
be forwarded out over any available links (Pactor, Winmor,
Packet, etc) to a site that has Internet, or stored for local
retrieval.
?
I don't see this happening automatically.? I have to queue
the message manually, and it uses BBS protocol and not Winlink
protocol.? Or will setting the Use B2 Protocol only do this??
When connecting to the RMS call of the HF station...the
station connects to the CMS but BPQ does not send the
user/pass to send the message, or retrieve messages.? In fact,
BPQ does not recognize the coonnect and disconnect prior to
RMS Trimode identifying itself and getting to the CMS prompt.
?
Maybe I don't yet understand what happens once the message is
sent to the BBS.? How can something like this be done?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Re: BPQMAIL crashes after upgrade of BPQ32 to 6.0.24.62
I think I've found the problem.
The problem is in bpq32.dll so reverting bpqmail.exe wouldn't help .54 of bpq32.dll should have worked.
Can you try this:
Thanks,
John
toggle quoted message
Show quoted text
On 18/02/2025 13:19, Marco Di Martino wrote: Hi John,
I do agree there's a corrupted file :)
You can download the archive file here:
Thanks!
Marco
iw2ohx
Il 2025-02-18 13:27 John G8BPQ via groups.io ha scritto:
This suggests a corrupt configuration.
Can you send me your BPQMail.cfg and I'll have a look?
Or maybe just zip and send your whole bpq32 data tree and I'll run it
under the debugger. But that is likely to be too big to send via
email.
73,
John
On 18/02/2025 11:32, Marco Di Martino wrote:
Hi John,
I'm still stuck with this issue.
I have also tried to revert back to BPQMAIL 6.0.24.54, but still the
BPQMAIL crashes after approximately 10 seconds.
I really don't want to downgrade the BPQ32 to a previous version
since we just saw the benefits of implementing the WhatsPac
application.
What can I do the better investigate the problem ?
Thanks.
73 de IW2OHX
Op. Marco
Links:
------
[1] /g/bpq32/message/43178
[2] /mt/111231697/145749
[3] /g/bpq32/post
[4] /g/bpq32/editsub/145749
[5] /g/bpq32/leave/4754036/145749/1579835809/xyzzy
|
Re: Question on RELAYAPP=BBS
On Tue, Feb 18, 2025 at 10:05 AM, Mark Taylor wrote:
When connecting to the RMS call of the HF station...the station connects to the CMS but BPQ does not send the user/pass to send the message, or retrieve messages.? In fact, BPQ does not recognize the coonnect and disconnect prior to RMS Trimode identifying itself and getting to the CMS prompt.
This part is resolved.
?
If it is possible to designate the HF station to forward Winlink messages that 'Fell back to the BBS' to be automatcially forwarded that would be great.
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Re: BPQMAIL crashes after upgrade of BPQ32 to 6.0.24.62
Hi John,
I do agree there's a corrupted file :)
You can download the archive file here:
Thanks!
Marco
iw2ohx
toggle quoted message
Show quoted text
Il 2025-02-18 13:27 John G8BPQ via groups.io ha scritto: This suggests a corrupt configuration.
Can you send me your BPQMail.cfg and I'll have a look?
Or maybe just zip and send your whole bpq32 data tree and I'll run it
under the debugger. But that is likely to be too big to send via
email.
73,
John
On 18/02/2025 11:32, Marco Di Martino wrote:
Hi John,
I'm still stuck with this issue.
I have also tried to revert back to BPQMAIL 6.0.24.54, but still the
BPQMAIL crashes after approximately 10 seconds.
I really don't want to downgrade the BPQ32 to a previous version
since we just saw the benefits of implementing the WhatsPac
application.
What can I do the better investigate the problem ?
Thanks.
73 de IW2OHX
Op. Marco Links:
------
[1] /g/bpq32/message/43178
[2] /mt/111231697/145749
[3] /g/bpq32/post
[4] /g/bpq32/editsub/145749
[5] /g/bpq32/leave/4754036/145749/1579835809/xyzzy
|
Today's second event.
2025-02-18 16:04:01 ? ?Incoming connection...
2025-02-18 16:04:07 ? ?N9SEO-1 connected ?VARA HF v4.8.9
2025-02-18 16:04:07 ? ?8300 TCP Port Closed unexpectedly
2025-02-18 16:04:08 ? ?Incoming Connection failed
2025-02-18 16:04:10 ? ?N9SEO-1 Average S/N: -3.6 dB
2025-02-18 16:04:10 ? ?Disconnected ? ? ?TX: 0 Bytes (Max: 0 bps) ? RX: 0 Bytes (Max: 88 bps) ? Session Time: 00:03
2025-02-18T10:04:00.452019-06:00 odroid LINBPQ[10039]: VARA Processing buffer - BUSY ON#015#015
2025-02-18T10:04:00.452978-06:00 odroid LINBPQ[10039]: VARA Returned from processing control packet#015
2025-02-18T10:04:02.056515-06:00 odroid LINBPQ[10039]: VARA Processing buffer - PENDING#015PTT ON#015#015
2025-02-18T10:04:02.056904-06:00 odroid LINBPQ[10039]: PENDING#015
2025-02-18T10:04:02.057134-06:00 odroid LINBPQ[10039]: VARA Returned from processing control packet#015
2025-02-18T10:04:02.220254-06:00 odroid python3[13411]: /usr/lib/python3/dist-packages/uaclient/apt_news.py:207: Warning: W:Download is performed unsandboxed as root as file '/run/ubuntu-advantage/aptnews.json' couldn't be accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied)
2025-02-18T10:04:02.220934-06:00 odroid python3[13411]: ? acq.run()
2025-02-18T10:04:02.381452-06:00 odroid systemd[1]: apt-news.service: Deactivated successfully.
2025-02-18T10:04:02.382220-06:00 odroid systemd[1]: Finished apt-news.service - Update APT News.
2025-02-18T10:04:03.086517-06:00 odroid LINBPQ[10039]: VARA Processing buffer - PTT OFF#015#015
2025-02-18T10:04:03.087131-06:00 odroid LINBPQ[10039]: VARA Returned from processing control packet#015
2025-02-18T10:04:03.095062-06:00 odroid LINBPQ[10039]: VARA Processing buffer - BITRATE (4) ?88 bps#015BITRATE (4) ?88 bps#015#015
2025-02-18T10:04:03.095313-06:00 odroid LINBPQ[10039]: VARA Returned from processing control packet#015
2025-02-18T10:04:07.652159-06:00 odroid LINBPQ[10039]: VARA Processing buffer - SN -3.6#015UNENCRYPTED LINK#015CONNECTED N9SEO-1 K5DAT-1 500#015LINK REGISTERED#015PTT ON#015#015
2025-02-18T10:04:07.652956-06:00 odroid LINBPQ[10039]: CONNECTED N9SEO-1 K5DAT-1 500#015
2025-02-18T10:04:07.653251-06:00 odroid LINBPQ[10039]: Calling Application BBS ? ? ? ? #015#015
2025-02-18T10:04:07.653569-06:00 odroid LINBPQ[10039]: VARA Returned from processing control packet#015
2025-02-18T10:04:07.908299-06:00 odroid systemd[1]: bpq.service: Deactivated successfully.
2025-02-18T10:04:07.909127-06:00 odroid systemd[1]: bpq.service: Consumed 1min 37.838s CPU time.
2025-02-18T10:04:38.205293-06:00 odroid systemd[1]: Starting bpq.service - BPQ...
Thanks, Lee K5DAT
|
David VK2NA