开云体育

git clone git://vps1.g8bpq.net/QtSM should give you 0.0.0.63 (the latest) 73, John

This message is probably for John but if anyone can answer it would be great. I am experiencing a number of different versions of QTSoundmodem. The one in the source zip file seems to compile to

Hi All, Cheers for that, a silly misconfig by myself :) - I hope to be back in shack this evening to try it out. I set it to PMS to indicate there's no routing or anything going on i.e. You can only

Hi Red & Mike If Mat is running RF as well on his BPQ PMS, he can only run it unattended for 30 minutes maximum, after that he has to turn it off, (terms of his licence) because it is using RF. just

On Sun, May 14, 2023 at 04:20 PM, Mike Melnik wrote: > > Mat > > Don't use PMS twice, you may have your reasons for > using the Connection application as PMS but most > use BBS, Here is my Application

You can use a RADIO command in your BBS forwarding config to change frequency before connecting There are examples in https://www.cantab.net/users/john.wiseman/Documents/Forwarding.html At the moment

With a NODEALIAS of M5MPC connects to any ssid will go to the node. 73, John

Mat Don't use PMS twice, you may have your reasons for using the Connection application as PMS but most use BBS, Here is my Application line for BPQ32 APPLICATION 1,BBS,,N9PMO,PMOBBS,255 The other

On Sun, May 14, 2023 at 02:59 PM, Matthew Corcoran wrote: > > Hi Red, > > Propagation went south tonight... Here is my config at the time. I guess > my nodealias has been causing the trouble. Will try

Hi Red, Propagation went south tonight... Here is my config at the time. I guess my nodealias has been causing the trouble. Will try again tomorrow eve. NODECALL=M5MPC-7 ; Node callsign

Mat if you can post your entire bpq32.cig config, via my email you already have or hear that would help a lot. All the best Red

Hi Mat The stream number of the application has to match the one configured on the WebUI BBS Config screen: MailMgmt->Configuration->BBS Appl Nr. In the bpq32.cfg, ensure that the following parameters

Thank you!!! This helps immensely. I can’t get QTSoundmodem to work here, some software issues, but I was able to get Channel 1 working in Direwolf on the USB side with the recommended tone pair.

Just to add, if I connect to mycall-1 from my node - I hit the BBS. If I connect from another node, I don't!? c 2 m5mpc-1 M5MPC:M5MPC-7} Connected to PMS [BPQ-6.0.23.1-IHJM$] Hello mat. Latest Message

Hi, I'm currently running BPQ on Windows as that's what my HF rig is set-up for. I have the following set:- APPLICATION 1,PMS,,M5MPC-1,PMS,255 Any connection to -1 goes to -7. Am I missing something?

For what ever its is worth, a portion of ax.25 packets is not human readable Some parts have multiple bits packed into a single character, so there is not even a 1:1 translation from all transmitted

You could run additional ports on the same QRG and remain compatible with Net105, if you flip sideband:

On Sat, May 13, 2023 at 10:18 AM, Christopher Molnar KO4YAW wrote: Here is a demo of how to set up monitoring in QtTermTCP https://youtu.be/Tl8VxafJskA 73 Red

Wondering if someone would be able to point me in right direction. I like hanging out on Net105 as there is a ton of activity there. But, I would like to participate in another net that has BBS to BBS

I redirect my direwolf output to a file using a standard redirect. It's something like "direwolf -c /path/to/config.conf > /var/log/direwolf.log"