Mat
Don't use PMS twice, you may have your reasons for using the Connection application as PMS but most
use BBS, Here is my Application line for BPQ32
APPLICATION 1,BBS,,N9PMO,PMOBBS,255
The other thing to keep in mind the in BPQ32.CFG, AXIP Port the QUALITY= Needs to be high enough
for a a remote node to store it, 192 is a more common start QUALITY=192
MINQUAL= I have done a lot of experimenting and found MINQUAL=144 to be the best so as not to
Flood my Nodes table, Based on MAXNODES=550 I do have quite a few node partners so I don't get carried away.
Also in the Global Section (Before the Ports section) NODESINTERVAL=37 you can very this to what you feel is ok,
this has some effect on remote nodes to save your Node Broadcast, remember you must be sending out a
Node Broadcast in Netrom or IPV6 a Node broadcast Direct from a TNC won't work.
Let me know if this helped.
73
Mike Melnik N9PMO
BPQ32 Group Moderator
