开云体育

On Sun, May 14, 2023 at 04:20 PM, Mike Melnik wrote:

Mat

Don't use PMS twice, you may have your reasons for
using the Connection application as PMS but most
use BBS, Here is my Application line for BPQ32

APPLICATION 1,BBS,,N9PMO,PMOBBS,255

The other thing to keep in mind the in BPQ32.CFG, AXIP
Port the QUALITY= Needs to be high enough
for a a remote node to store it, 192 is a more common
start QUALITY=192
MINQUAL= I have done a lot of experimenting and found
MINQUAL=144 to be the best so as not to
Flood my Nodes table, Based on MAXNODES=550 I do have
quite a few node partners so I don't get carried away.

Also in the Global Section (Before the Ports section)
NODESINTERVAL=37 you can very this to what you feel is
ok,
this has some effect on remote nodes to save your Node
Broadcast, remember you must be sending out a
Node Broadcast in Netrom or IPV6 a Node broadcast
Direct from a TNC won't work.

Let me know if this helped.

73

Mike Melnik N9PMO
BPQ32 Group Moderator

Mat is purposefully not using BBS command as to keep head down on RF as running a BBS isn’t allowed on that license without a NoV, it is semantics though, using the BBS as a PMS.?
73
Red