开云体育

The TCP-MASTER goes on the node that you have no real control over. WW2BSA-5 TCP-MASTER goes in WW2BSA-5 and TCP-SLAVE goes in WW2BSA-7 You will nedd to port forward port 10200, protocol TCP at

If you are not scanning you can comment out the scan lines.? Then manually set your radio to the frequency and mode desired.? It will never change. As long as you are scanning it will switch

Nice tool. Nice work. I'll be interested to have a copy if avail for distribution. Thanks, Jean

I like it, it will let me know which links are having issues an can better keep track. [email protected]> wrote:

This in my Rigcontrol for my 7300 RADIO 1 0:00 10,7.1032,USB,F2,D 4,14.1065,USB,F2,D 02:00 5,3.596,USB,F2,D 13:00 10,7.1032,USB,F2,D 4,14.1065,USB,F2,D Glenn/N3MEL

You can send RADIO commands from the node or a BBS forwarding script. Can't you just leave the radio in USB-D? 73, John

The VARA TNC? only supports listening for up to 5 callsigns. I'm a bit surprised you got 6 to work. VARA displays the calls it is listening for on the title bar. 73, John

Hi All... I have a few partners that have helped me out, but would like to establish a few more in the south east gulf coast area. Looking to expand coverage towards Georgia. I'm still fairly new, but

We are in the process of creating a new node which has a VARA port. This is working for outgoing connects and some incoming connects. We have a total of 11 applications, each using a different ssid of

Hello Chris, Assuming the gateway is located at the home site, the maps would look like this: MAP WW2BSA-7 X.X.X.X TCP-Master 10200 B ; home MAP WW2BSA-5 0.0.0.0 TCP-Slave 10200 B ; Arts

I'm experimenting with one of my BPQ32 nodes. I need advice on how to MAP through a T-Mobile Arcadyan KVD21 Gateway. For only $35/mo it's a great way to provide internet service at almost any location

Thanks Robert Cartier kd1jg@...

thanks but without the PTT_SETS_INPUT my radio stays in USB and not USB-D and I get no signal to the internal card of the 7300 I found that I need the following to get my setup to work Also since I

I use hamlib: RADIO 2 HAMLIB 10.78.196.104:4532 00:00 99,3.5957,USB-D,F1,D 11:59 99,7.101,USB-D,F1,D 17:00 99,14.102,USB-D,F1,D 20:00 99,7.101,USB-D,F1,D **** 3s, Chuck

This only applies if you are running a sound card modem and a hardware TNC on the same radio. If you only use VARA or other sound card modes you just set Data mode modulation source to USB and leave

P123 is Pactor 1, 2, or 3 P23 is Pactor 2 & 3 only. P34 is Pactor 3 and 4 only. R1 is Robust Packet 300 R2 is Robust 600 vn is Vara 500hz vw is Vara 2300 vt is Vara 2750 Lots more at

I found that the 7300 needs a little more commands to control the mode like USB-D can someone explain the different options available. like P123, R1.. I assume R1 is for the radio number but I have

Add ,D after USB,F1 73, John

Try it that way, with the D in the rigcontrol line. -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852

Hi all Is there a command or file I can update to allow the icom ic-7300 to switch to USB-D mode when using vara. on a CI-V PTT This works fine on ?winlink express but when I am starting bpq and