开云体育

Hello I used to run a dial-in BBS years ago prior to the Internet. Local access, light use, simple, effective for a small group. Could have been used widely but just wasnt. It was on a Mac back in

I can't access this repo. Is it public? 73, Brad AC7BR

KISSHF should beacon. I'll have a look at the code. Thanks, John

Hello John, I have made a workaround that takes some of Lee's idea of logging in via telnet and sending the sysop commands to attach a port, send the radio commands, etc. Then it sends the http POST

Maybe not a significant problem, but I would like to see this fixed. Regarding WP Updates containing errant hierarchical addresses containing a "#", then a two character state designation, then

Thanks again John, very helpful! 73 de va3rjs Bob

You send all the nodes in your Nodes list that have a quality equal to or above the MINQUAL parameter on the PORT config. The nodes that get into you nodes table from other station's broadcasts are

For anyone interested here is an python app that fetches driving directions. https://github.com/kq4cin/Packet-apps.git

Thanks Will definitely have a look through the tutorial as well! This group is great, lots of useful info, and quick replies! 73 de va3rjs Bob

Thanks Charles I will give the doc a read! Bob

You're looking for MINQUAL. If you set this too low you may advertise nodes that others cant reach. This may help you get a better overall idea of how netrom works:

Go to http://hamgate.ampr.org/docs/ and read the document NetRomTutorial.pdf -- Charles J. Hargrove - N2NOV NYC-ARECS/RACES Citywide Radio Officer/Skywarn Coord. NYC-ARECS/RACES Nets 441.100/136.5 PL

Sorry let me ask one more question….. do nodes only advertise adjacent nodes in their node broadcast message, or all nodes they know about? If the later is there a parameter that controls what gets

Thanks John, we haven’t talked since early Pitnc days:) The QUALITY parameter seems to have done it! I am now sending node broadcasts! Is there a parameter that controls the ttl value of node info

On 241215 KA3VSP/U @ KA3VSP.#DE.USA.NOAM zip ? Brian PasternU
? It looks like a sysop somewhere omitted the State in Brian's HA and some of the 'rubout' sequence is passing through, which my BBS

If you set QUALITY on a KISS port config, and don't set NODESINTERVAL to zero you will send NODES broadcasts. But I think you are saying that you are not receiving NODES messages. You don't have to do

The are problems with beaconing while scanning, the main one being that you can't control which frequency the beacon will be sent on. So the code has no provision for suspending the scan while

Hi all sorry if this is a repeat, i did some looking around but did not find anything that seemed to apply. new to linbpq, i have a working instance and a port for a kiss tnc that is sending messages

stations to send your traffic to enter the system. Hi, Jim: Thanks. I did not see any mention of Ohio or 'hub stations'. Actually, I am interested in how to get traffic from DTN...to delivered. 73,

Hello Kayne, The perl version can't handle javascript, either, but fortunately it doesn't need to in this case. A port beacon screen can be accessed directly using a URL like the one below for port 5.