开云体育

John that worked. Thanks. So now I think I have a port conflict. I start my pi, BPQ. working fine....I did try to start qtsoundmodem from command line (putty), says it running, however qt Term

No, but make sure you've selected the right audio device in QtSM and that there is sufficient audio drive to trigger the PTT circuit on the SignaLink. Check the audio levels - I use alsamixer. 73,

You can only pick up bulls if they have been queued to you on that node. So to pick up bulls on other nodes you'd have to define all users as BBS on all your Nodes, with the same TO or AT lists. Only

Amateur Radio Digital Communications ( https://www.ampr.org/ ) administers 12 million routable IPv4 addresses (44.0.0.0 - 44.127.255.255) for amateur radio applications.? They can be used for such

Thanks Lee and John. I have the Program working well and receiving packet. The only issue im having now is transmit. QtSoundModem is receiving the command from QtTerm TCP, however the signallink is

Noticed that login and password no longer works for ISP Interface.? I assume it is because Google no longer supports less secure apps. Is there a work around? Thanks, Harmen VE3EMA

Thanks, Mark.? Yes, John's documentation is pretty thorough on all of the options available for geographic / hierarchical based routing.??? Our situation is a distributed club, yes.?? Users HA

It seems to me your network topology looks like a club of several nodes.? John has some examples of club forwarding in the documentation. Have you seen that? I don't think I would mark any local user

Is it possible for a user to pick up B messages by connecting to a node at which they are not homed? Running in a network of several nodes.?? Local users are checked as a BBS, as are the other node

John, et al... I have one install that although is connected to the internet it is only for my convenience and not for traffic or any public connections. Ever, I run RMS Relay in the local post office

Well, John - that makes perfect sense.? I upgraded to stop the errors I was getting with a number of my downlink partners, but hadn't upgraded for a while previously.? Now I know how the line is

Brett, The sudo commands I provided were the "extra's" needed for compiling, but in hindsight you were probably missing the standard prerequisites for running the binary version. It's all documented

Thanks John, I have it working now. Now I have to set up the port(s) in BPQ to match the device info qt sound modem. Brett

It looks like housekeeping does work if I do it via the terminal. Running it via the web ui does not work.

Shut down Mail, delete DIRMES.SYS and the contents of the Mail directory then restart. 73, John

I tried that but everything is still there.

Try going to Housekeeping under the Main Configuration, then set all lifetimes to something you would prefer such as 15 days. Then run Housekeeping twice.

Is there a way to completely clear my mail? My node was down for a few months and now that it's up, it wants to send a bunch of old bulletins to folks. I'd like to just nuke my mail. I've run "km"

There was a bug which meant that connecting to the application defined by the 4th parameter didn't work with QtTermTCP or the Web Terminal. This was fixed in an early 6.0.22 beta. The documentation

Unless you need to compile your own version you would be better off installing a binary version - QtSoumdModem for x86 Linux or piQtSoundModem for the Raspberry Pi. 73, John