A normal UZ7HO port definition is
PORT
?ID=UZ7HO
?DRIVER=UZ7HO
?CHANNEL=A
?INTERLOCK=4
?PACLEN=100
?CONFIG
? ADDR 127.0.0.1 8000
? MAXSESSIONS=5
? UPDATEMAP
ENDPORT
How are you running UZ7HO Soundmodem on a Pi? Or are you running my
QtSoundModem?
If you are running Soundmodem on a separate Windows machine, the
ADDR line should have the IP address of the Windows machine in place
of 127.0.0.1
Make sure that the AGWPE interface is enabled in the Soundmodem
Devices menu, with the same port number as in the ADDR line.
73,
John
On 05/06/2022 23:16, Brett Williams
wrote:
toggle quoted message
Show quoted text
UZ7HO. But I'm not sold only to that as it is the only one I
used....
Brett
On 6/5/2022 3:13 PM, John G8BPQ
wrote:
Which modem are you trying to use with the Signallink?
73,
John
On 05/06/2022 17:10, Brett Williams
wrote:
Group, is anyone using a Signal Link USB with a PILINBPQ
setup? I have tried some pre-made port configs, non seemed to
work.?
Thanks for the help..
Brett
KB5YZB
