??? Nice work? ! .Get yer self a small bottle of gun blueing
& give it a quick clean with some alchaol or acetone making
sure not to touch it with bare finders when clean & then give
a pass or 2 with the gun blueing & some cotton balls &
when dry a quick coat with some oil & it won't rust .
animal
On 1/13/25 7:23 PM, Allen Underdown via
groups.io wrote:
toggle quoted message
Show quoted text
Well, my first
"real" mill project is complete. Note that I had started
before I had the drawings.
Not
pretty, not to any kind of tolerance, but functional
Allen
Allen Underdown
allen@...
Sent
from my mobile device.
Originally, yes, but corrected to the clamp plate
later.
Bill in OKC?
William R. Meyers, MSgt, USAF(Ret.)
Aphorisms to live by:
Good judgement comes from experience.
Experience comes from bad judgement.?
SEMPER GUMBY!
Improvise, Adapt, and Overcome.
Physics doesn't care about your
schedule.
The only reason I know anything
is because I've done it wrong enough times to
START to know better.
Expect in one hand, expectorate
in the other. See which one gets full
first.
On Tuesday, January 7, 2025 at 06:40:57 AM CST,
Brian Roberts via groups.io
<bri7rob@...> wrote:
Drawing for the tailstock base....which IS
what the OP asked for....unless I am mistaken?
?
