开云体育

He means the front 4 wheels Mike G Perth WA AUST As in 4_6_2

Jeff I have a parts list .. Tom

Hi Jeff, Welcome to the A1G group. Attached are the three pages of the Atlas service manual for the Pacific (4-6-2). I guess I don't understand what you mean by, "...the front 4 attaches to."

I'm looking for any legible parts list, for an Atlas 4-6-2 ATSF n scale. Mostly looking for screws and whatever it is that the front 4 attaches to.. Thank you, Jeff

Yes, You should be able to. But if for some reason, it bounces, send me a copy to look at and buy from. Tom in Kansas

I have a few A1G cars I would like to sell. Can I post them here? Ed TB

Might put on a listing a N Scale Yard Sale after you join up. It's found on Yahoo. Someone might have a loco that's not running and/or parts you might need to get your back to running shape.

Does any one know where I can get replacement armatures, for "Atlas" C24-5, C-Liner Pennsy? It was suggest try E-bay but I couldnt locate one. Mike West Coast (Australia) wrote:

Ah, I?didn't realize it could be that bad QA. I have two locomotives that when going forward it makes a loud noise, when going in reverse they run very smoothly.One locomotive has since started

I guess what I should have said by normal is normal for Mehano and their spotty production and QA. I doubt that the worm is actually worn that much on the end instead of it just being molded

In my case, the right side isn't fully flat. The left side has about 2mm of plastic before the screw starts, while the right side (seems) to be worn past the non-screw part straight to the screw.

Hi Nicolas, That's normal. The ends are flat like that. When you install the worms into the gear towers, put washers on either side of the worm to center it and keep it from moving back and forth

Can anyone tell me if the right side of this worm screw is worn out or if that is the way its supposed to be ?

I know this is a year since you posted the message, but wondering if you ever did sell the uncoupler ? Thanks Nicolas

All , #2145 NORTHWESTERN (never made) - This was supposed to be CHICAGO and NORTHWESTERN RR painted in the Green and Yellow not sure what the road number would have been . - Here’s a

Thanks to a listing on eBay, we're one step closer to describing all of the E-R Models Bay Window Cabooses that were produced using the A1G tooling. Catalog Numbers 70107 and 70108 are 'Route Rock'

I never really cared for the Auto Carrier that Atlas offered, too me it was "very toy like" in looks. Found this 1960 photo of a Frisco Lines auto carrier, for the most part it fairly close to what

If you go to http://www.rivarossi-memory.it you see al ot more.

I stumbled on this the other day - apologies if it has already been mentioned: http://www.rivarossi-memory.it/Scala_N/Rivarossi_Scala_N.htm

Help needed, if anyone has a 1971 catalog I am in need of a scan copy of the page(s) that list just the freight cars. I have a copy of the 1969, 70 and 72 but have not been able to find a 1971. Any