Re: DX7S ORIGINAL PATCHES AND PERFORMANCES
It is all still here as a binary dump:
/g/YamahaDX/files/DX7s/Cartridge/DX7S-ROMCARTRIDGE.bin
|
Re: DX7S ORIGINAL PATCHES AND PERFORMANCES
I think I have all the required bits (in pieces). I would just have to do some reassembly and figure out how to extract what is on the DX7S factory ROM into order to make sys ex files.
GB
toggle quoted message
Show quoted text
On 7/30/2020 8:07 AM, Daniel Forró wrote: I can send internal Voice banks and Performances, but I haven’t ROM4 Voices and Performances.
Daniel Forro
On Jul 30, 2020, at 22:44, grantpbt <grantbt@...> wrote:
Here is an explanation. I think the easiest method is using a cartridge.
GB
On 7/29/2020 1:19 PM, rogeriolattouf wrote:
DEAR FRIENDS.
I AM FROM BRAZIL AND RIGHT NOW, I'VE BOUGHT A DX7S IN EXCELENTE CONDITION. BUT, UNFORTUNALY SOME ORIGINAL PATCHES ARE MISSING.
HOW COULD I RECOVER THESE ORIGINAL FACTORY PATCHES AND PERFORMANCES?
THANK YOU SO MUCH IN ADVANCE IF SOMEONE CULD HELP ME.
BEST REGARDS.
ROGER LATTOUF
|
Re: DX7S ORIGINAL PATCHES AND PERFORMANCES
I can send internal Voice banks and Performances, but I haven’t ROM4 Voices and Performances.
Daniel Forro
toggle quoted message
Show quoted text
On Jul 30, 2020, at 22:44, grantpbt <grantbt@...> wrote:
Here is an explanation. I think the easiest method is using a cartridge.
GB
On 7/29/2020 1:19 PM, rogeriolattouf wrote:
DEAR FRIENDS.
I AM FROM BRAZIL AND RIGHT NOW, I'VE BOUGHT A DX7S IN EXCELENTE CONDITION. BUT, UNFORTUNALY SOME ORIGINAL PATCHES ARE MISSING.
HOW COULD I RECOVER THESE ORIGINAL FACTORY PATCHES AND PERFORMANCES?
THANK YOU SO MUCH IN ADVANCE IF SOMEONE CULD HELP ME.
BEST REGARDS.
ROGER LATTOUF
|
Re: TX81Z patch bank demos
Thanks for such great info everyone!
Daniel- their website hasn't worked in a long time. I got the TX stuff on their eBay page:
PS my photos on the TX demos- some are faked, as I didn't have original tapes or disks. If anyone has a good photo of volumes 3, 5, 7, 8 and 9 that would be killer to have. Or documentation I can post.
From my initial investigation of the V50 banks, a great many TX81Z patches are duplicated, but enhanced. For example, the NY Collection (v50) = Classic FM (TX81Z), but now with FX and better polyphony. The V50 is great and 16 voice poly makes it a joy to play.
Daniel, how do you set your TX81Z's up? Even/Odd is kind of lame, you don't really double the polyphony. MIDI routing in the DAW? Jay
On Thu, Jul 30, 2020 at 9:55 AM danforcz < danforcz@...> wrote: Somehow I can’t open Greyt Sounds web… I would like to have these sets in my collection. Thanks fo this info. I have all 12 SSU sets for DX7II, but didn’t know they made also this for TX81z.
Besides other sets I have another two sets from SSU - R & B Dance and Designer. I have converted them directly from old tapes thanks to CAS application. I did the same with WDB01 library for WX wind controller and TX81z/WT11.
You can try to convert TX sounds in Martin Tarenskeen application TXConvert to other 4-OP synthesizers. Unfortunately only voices, not performances. But it would be possible at least to emulate TX performances in V50. I have now 4 TX81z and 5 V50 (besides many other FM and other instruments), somehow I fell in love with V50. Underestimated instrument…
Daniel Forro
Hey everyone, to alleviate quarantine boredom I have been making bedroom studio demos of old TX81Z SSU (Sound Source Unlimited) patch banks. I got them from Greytsounds on their eBay page and they were very successful distracting me from the state of the world. Hope you enjoy them! I can tell you these will also work in the V50 (although you'll need to manually adjust the polyphony), and the TQ5, but only the patches, not perfs (which to me is the whole point). Another user has confirmed DX11 full compatibility.
Hope everyone is healthy, and avoiding humans by playing your synths.
--
--
|
Re: V50 SSU (sound source) patches?
Thanks! Mr. Edgar got me some great stuff...now off to record!
On Thu, Jul 30, 2020 at 10:00 AM danforcz < danforcz@...> wrote: I have seen Down Under Collection, New Age and New York disks somewhere for sell, but it was sold before I could get it. I have various files for my 5 V50, this series not yet… Congratulations!
Daniel Forro
Hi all,
After making Sound Source patch videos for the DX7iiFD and TX81Z I am now on to the V50. I found the first 4 disks online. Quite good! But disks 5 and 6 have not turned up. Has anyone found them? See attached from the old advertising (thanks to MIDI tech guy UK for his help).
V505 Down Under Collection
V506 Urban/Pop Industrial?
--
<Screen Shot 2020-07-29 at 12.05.22 PM.png>
--
|
Re: V50 SSU (sound source) patches?
I have seen Down Under Collection, New Age and New York disks somewhere for sell, but it was sold before I could get it. I have various files for my 5 V50, this series not yet… Congratulations!
Daniel Forro
toggle quoted message
Show quoted text
Hi all,
After making Sound Source patch videos for the DX7iiFD and TX81Z I am now on to the V50. I found the first 4 disks online. Quite good! But disks 5 and 6 have not turned up. Has anyone found them? See attached from the old advertising (thanks to MIDI tech guy UK for his help).
V505 Down Under Collection
V506 Urban/Pop Industrial?
--
<Screen Shot 2020-07-29 at 12.05.22 PM.png>
|
Re: TX81Z patch bank demos
Somehow I can’t open Greyt Sounds web… I would like to have these sets in my collection. Thanks fo this info. I have all 12 SSU sets for DX7II, but didn’t know they made also this for TX81z.
Besides other sets I have another two sets from SSU - R & B Dance and Designer. I have converted them directly from old tapes thanks to CAS application. I did the same with WDB01 library for WX wind controller and TX81z/WT11.
You can try to convert TX sounds in Martin Tarenskeen application TXConvert to other 4-OP synthesizers. Unfortunately only voices, not performances. But it would be possible at least to emulate TX performances in V50. I have now 4 TX81z and 5 V50 (besides many other FM and other instruments), somehow I fell in love with V50. Underestimated instrument…
Daniel Forro
toggle quoted message
Show quoted text
Hey everyone, to alleviate quarantine boredom I have been making bedroom studio demos of old TX81Z SSU (Sound Source Unlimited) patch banks. I got them from Greytsounds on their eBay page and they were very successful distracting me from the state of the world. Hope you enjoy them! I can tell you these will also work in the V50 (although you'll need to manually adjust the polyphony), and the TQ5, but only the patches, not perfs (which to me is the whole point). Another user has confirmed DX11 full compatibility.
Hope everyone is healthy, and avoiding humans by playing your synths.
--
|
Re: DX7S ORIGINAL PATCHES AND PERFORMANCES
Here is an explanation. I think the easiest method is using a cartridge.
GB
toggle quoted message
Show quoted text
On 7/29/2020 1:19 PM, rogeriolattouf wrote: DEAR FRIENDS.
I AM FROM BRAZIL AND RIGHT NOW, I'VE BOUGHT A DX7S IN EXCELENTE CONDITION. BUT, UNFORTUNALY SOME ORIGINAL PATCHES ARE MISSING.
HOW COULD I RECOVER THESE ORIGINAL FACTORY PATCHES AND PERFORMANCES?
THANK YOU SO MUCH IN ADVANCE? IF SOMEONE CULD HELP ME.
BEST REGARDS.
ROGER LATTOUF
|
DX7S ORIGINAL PATCHES AND PERFORMANCES
DEAR FRIENDS.
I AM FROM BRAZIL AND RIGHT NOW, I'VE BOUGHT A DX7S IN EXCELENTE CONDITION. BUT, UNFORTUNALY SOME ORIGINAL PATCHES ARE MISSING.
HOW COULD I RECOVER THESE ORIGINAL FACTORY PATCHES AND PERFORMANCES?
THANK YOU SO MUCH IN ADVANCE? IF SOMEONE CULD HELP ME.
BEST REGARDS.
ROGER LATTOUF
Hi all,
After making Sound Source patch videos for the DX7iiFD and TX81Z I am now on to the V50. I found the first 4 disks online. Quite good! But disks 5 and 6 have not turned up. Has anyone found them? See attached from the old advertising (thanks to MIDI tech guy
UK for his help).
V505 Down Under Collection
V506 Urban/Pop Industrial?
--
|
V50 SSU (sound source) patches?
Hi all,
After making Sound Source patch videos for the DX7iiFD and TX81Z I am now on to the V50. I found the first 4 disks online. Quite good! But disks 5 and 6 have not turned up. Has anyone found them? See attached from the old advertising (thanks to MIDI tech guy UK for his help).
V505 Down Under Collection
V506 Urban/Pop Industrial?
--
|
Hey everyone, to alleviate quarantine boredom I have been making bedroom studio demos of old TX81Z SSU (Sound Source Unlimited) patch banks. I got them from Greytsounds on their eBay page and they were very successful distracting me from the state of the world. Hope you enjoy them! I can tell you these will also work in the V50 (although you'll need to manually adjust the polyphony), and the TQ5, but only the patches, not perfs (which to me is the whole point). Another user has confirmed DX11 full compatibility.
Hope everyone is healthy, and avoiding humans by playing your synths.
https://www.youtube.com/playlist?list=PLeom984fnWzKAH2dKB4GlDfa4_IwfADOo
--
|
Re: [sdiy] Fantasia patch for DX11/TX81Z/V50
Michael, check out Bank 06, that has Fantasia somewhere. These are from the old Sound Source Unlimited banks that are now carried by Greytsounds.
--
|
Re: Tears for Fears - Everybody Wants to Rule the World - Synth pattern like guitar
Walter, I have the Transcription of the intro. If you can get me an email addy, I’ll try to get it to you.?
|
Re: Tears for Fears - Everybody Wants to Rule the World - Synth pattern like guitar
Ive studied this song for several weeks. #1: Curt
Smith is the lead vocalist and Ian Stanley is playing the synth parts. Roland Orzabal occasionally plays along with Ian on the synth riff but Roland also has different rhythms and two leads along with the opening riff. If anyone plays along with or imitate something , it is the guitar behind the Synth chords. From all the videos old and new Ian or Curt Smith are playing the bass part on keys.?
|
Re: Tears for Fears - Everybody Wants to Rule the World - Synth pattern like guitar
Which is waaaaaaaaaay overpriced, but oh so beautiful!
toggle quoted message
Show quoted text
On Jul 6, 2020, at 8:21 PM, greg thurman via groups.io <trevon12001@...> wrote:
? Tears for Fears used this model Yamaha keyboard.
https://reverb.com/item/34114788-yamaha-dx-1-synthesizer-with-a-b-cartridges
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message -------- From: "msc1958 via groups.io" <msc1958@...> Date: 7/6/20 2:52 PM (GMT-07:00) Subject: Re: [YamahaDX] Tears for Fears - Everybody Wants to Rule the World - Synth pattern like guitar
Great song. I'd be interested in that patch also. Regards, ? Mark ? <*)))>{? "Make a joyful noise unto the LORD, all ye lands." Psalms 100:1 > On Jul 1, 2020, at 10:19 AM, Walter Rodrigo de Sá Cruz <waltercruz@...> wrote: > > Hi people! > > I'm curious about the synth part at the beginning of the song - the arpeggiated synth. > > > "...another unusual part was created with a MIDIed synth stack for the main guitar part in the verses of "Everyone Wants To Rule The World". We MIDIed the two DX-7's with the (Prophet) T8, all roughly playing guitar sounds, and programmed the sequence, Stanley describes...then the guitar played the same part in the same register and triggered the sequence at the same time. It helped the synth sounds become a bit more organic with the sound of the guitar."-- > > It's kinda similar to ROM2B - 17. HARP-FLUTE, but not exactly equal. > > []' > - Walter > >
|
Re: Tears for Fears - Everybody Wants to Rule the World - Synth pattern like guitar
Tears for Fears used this model Yamaha keyboard.
https://reverb.com/item/34114788-yamaha-dx-1-synthesizer-with-a-b-cartridges
Sent from my Verizon, Samsung Galaxy smartphone
toggle quoted message
Show quoted text
-------- Original message -------- From: "msc1958 via groups.io" <msc1958@...> Date: 7/6/20 2:52 PM (GMT-07:00) Subject: Re: [YamahaDX] Tears for Fears - Everybody Wants to Rule the World - Synth pattern like guitar
Great song. I'd be interested in that patch also. Regards, ? Mark ? <*)))>{? "Make a joyful noise unto the LORD, all ye lands." Psalms 100:1 > On Jul 1, 2020, at 10:19 AM, Walter Rodrigo de Sá Cruz <waltercruz@...> wrote: > > Hi people! > > I'm curious about the synth part at the beginning of the song - the arpeggiated synth. > > > "...another unusual part was created with a MIDIed synth stack for the main guitar part in the verses of "Everyone Wants To Rule The World". We MIDIed the two DX-7's with the (Prophet) T8, all roughly playing guitar sounds, and programmed the sequence, Stanley describes...then the guitar played the same part in the same register and triggered the sequence at the same time. It helped the synth sounds become a bit more organic with the sound of the guitar."-- > > It's kinda similar to ROM2B - 17. HARP-FLUTE, but not exactly equal. > > []' > - Walter > >
|
Re: Tears for Fears - Everybody Wants to Rule the World - Synth pattern like guitar
Great song. I'd be interested in that patch also.
Regards,
? Mark ?
<*)))>{ "Make a joyful noise unto the LORD, all ye lands." Psalms 100:1
toggle quoted message
Show quoted text
On Jul 1, 2020, at 10:19 AM, Walter Rodrigo de Sá Cruz <waltercruz@...> wrote:
Hi people!
I'm curious about the synth part at the beginning of the song - the arpeggiated synth.
"...another unusual part was created with a MIDIed synth stack for the main guitar part in the verses of "Everyone Wants To Rule The World". We MIDIed the two DX-7's with the (Prophet) T8, all roughly playing guitar sounds, and programmed the sequence, Stanley describes...then the guitar played the same part in the same register and triggered the sequence at the same time. It helped the synth sounds become a bit more organic with the sound of the guitar."--
It's kinda similar to ROM2B - 17. HARP-FLUTE, but not exactly equal.
[]'
- Walter
|
Tears for Fears - Everybody Wants to Rule the World - Synth pattern like guitar
Hi people!
I'm curious about the synth part at the beginning of the song - the arpeggiated synth.
"...another unusual part was created with a MIDIed synth stack for the
main guitar part in the verses of "Everyone Wants To Rule The World". We
MIDIed the two DX-7's with the (Prophet) T8, all roughly playing guitar
sounds, and programmed the sequence, Stanley describes...then the
guitar played the same part in the same register and triggered the
sequence at the same time. It helped the synth sounds become a bit more
organic with the sound of the guitar."--
It's kinda similar to ROM2B - 17. HARP-FLUTE, but not exactly equal.
[]'
- Walter
|
following the discussion, sounds like wonderful ideas, thor!
though being on no social network, i would sadly miss the patch on facebook then :-((
i don?t think, the group rules would speak against an FS1R patch on this list, hint, hint…
thanks for considering
hans
toggle quoted message
Show quoted text
Am 01.07.2020 um 04:24 schrieb Thor Z <thor276@...>:
Thanks for the encouragement!
I'll make a recording of it when I'm finished, it's only part way completed.
I'll post the patch on the FS1R Facebook Group when I'm done as well.
On 6/30/2020 4:52 PM, Mark Sherman wrote:
Wow, that's amazing amount of dedication to take the time to program all of those operators. Now I'm curious as to what it sounded like.
|
Thanks for the encouragement!
I'll make a recording of it when I'm finished, it's only part way
completed.
I'll post the patch on the FS1R Facebook Group when I'm done as
well.
On 6/30/2020 4:52 PM, Mark Sherman
wrote:
toggle quoted message
Show quoted text
Wow, that's amazing amount of dedication to take the time to
program all of those operators. Now I'm curious as to what it
sounded like.?
|
12-op
