开云体育

If you have not bought the FC40 look at the SG230. A way better tuner. I have found the FC40 to be temperamental wrt wire lengths. JD --------------------------------------------

I'm really struggling to settle on an antenna for my first HF rig. I'm getting some good input on a related post in the FT-450D group.

Yeah - it stopped working again. I had disconnected it from my FT-897D and run a different antenna off a LDG-897Plus ATU for a week. Reconnecting, it fails to function. Full un-install, re-install,

The FC40 is an odd duck tuner. POS comes to mind. Mine now sits on my shelf reminding me how much I like my SGC 230. --------------------------------------------

Hmmm ... rf floating on coax braid towards the rig??? What antenna are you usin and what round system has the tuner to work against?!? Had similar trouble on filedday with my fc1000 (also an

I switched to 107ft and 85ft random wires and still wasn't having any luck. I switched out to a new controller cables, added a lot of Mix 31 ferrite rods, and added a second ground rod wired to AC

I was using raingutter antenna with my FT-897D and was able to pick up quite a lot of chatter on 20m, 40m and 80m. The gutter downspout was connected to my MFJ-898D tuner wire post and a set of 1/4

Nice offer Yepp ... fc1000 is a VERY good remote tuner (i also own one) And you are correct ... can be used with nearly ANY 100w class trx You only need ptt, agc and 12v Greetz Sigi Dg9bfc ps

Yaesu FC-1000 Remote Antenna Tuner/Coupler was installed for a few experimental operations, with 25-30 foot long wire. Tuned and performed flawlessly on 80 – 10 with full power from FT-757.

it is only a test message

Hello all. My name is Jeff, callsign K4LMP. I just joined the group, and wanted to say hello. The moderator was interested in what type of gear I had, so I just figured I would start a post, and

hi ken here,has anyone tried to improve the 30 by adding extra capactors,their surface mounted and not a lot of surface ares to solder to,I built a unit with extra capacters which were switchable on

Hello. Look the file I just uploaded. 73s rami, oh6bi

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the YaesuTuner group. File : /FC-40 Technical Supplement.pdf Uploaded by

does anyone have a spare copy of the circuit diagram showing what value capaciters are used,as the fc30 rearly needs uprating in its range 16 low to 150 high,regards ken m3zkb,rafars 4680

regarding tuners,ive built quite a few now and to increase the range of the impedance to match top band one parrells up more capacators to increase the range of it,So has anyone tried adding more

hi ken here,what you could try is to set the tuner set up on A and set up the 2mt twig on B so the rig dosnt think the swr is wayout and so dosnt shut down the power,might be worth trying,regards

what might be the problem is what ever band your in the co-ax idealy needs to be in multiples of half waves so the rig sees the proper impedenceof the antenna,so if the fc30 is on the hf socket if is

Open wire (aka ladderline) ... cause you can have high swr on that line NEVER use coax for that!!! Dg9bfc Sigi

I need to separate the FC-40 from the wire dipole antenna by a distance of 10 feet. What is the best way to connect the FC-40 antenna post to a wire dipole antenna? Thanks, Robert