开云体育

You'd have to run in split mode if you want tx/rx on the same band.

On VHF the cavities are the size of beer barrels! And you would need 4-6 depending on split Sent: 20 November 2022 11:12 To: [email protected] Subject: Re: [YaesuFT847] TX/RX same band in

HI Andy Needless to put it in SAT if on the same band, at most use VFO A and B and not SAT mode. Is there any option in SAT mode that you would miss in normal mode except full duplex which on the

Not at the same time. Links: ------ [1] /g/YaesuFT847/message/685 [2] /mt/95144276/1045683 [3] /g/YaesuFT847/post [4]

Is it possible to transmit and receive in the same band when in Satellite mode? Thanks, Andy

Thanks guys, sounds like it might not be worth the trouble. The idea is to use a secondary receiver with the 3000, not instead of it. Why? Might be handy in contests, but mostly just because it’s

I tend to agree here, the FT 847 was never the best for HF, you could change all the pin diodes, you could also fit 10 to 15dB attenuator, this will help on RX, and also help when the Tx is on the

I believe that applying 5 volts to pin 8 of the tuner socket will inhibit TX. I am at a loss though to understand why you? would want to use the 847 for RX, when the 3000 is arguably better at RX on

Hey all, just found this group. Maybe this is a stupid question but bear with me. Is there a way to get RX-only on HF (or disable TX on the the antenna port)? I don’t use HF much in my 847 and got

That rather sounds like previous owner had a tuner with it, and could explain error signal. Radio was looking for something not there. Unfortunate you had loaded memories before resetting.

Dennis , No, not in satellite mode, but working now ? Jeff E M0UHF ?? ________________________________ Sent: Sunday, October 16, 2022 7:16:19 AM To: [email protected]

Good morning Andy, Denis and others. I have a bit the bullet and decided to copy my memories and manually re-write them. I reset the radio. Using menu, 35 as the manual suggests. And Not turning the

By any chance is the rig in Satellite mode ? 73 Dennis VE3XC

I don't think it is possible to do a partial reset to retain memories. You can do a reset to delete memories, but retain settings, but not the other way around. Time to get out a pencil and paper and

? Hi Andy, I haven’t done a reset yet, but I wanted to do a partial reset, but I’m not sure how to do that just yet as I want to keep the memories I have just put in manually. Thanks for your

Hi Andy, I haven’t done a reset yet, but I wanted to do a partial reset, but I’m not sure how to do that just yet as I want to keep the memories I have just put in manually. Thanks for your

Hi Jeff, normally shows error when trying to tx out of band as you say. Have you done a reset, that quite often cures things. Power off, FAST and LOCK held in, power on. See if that cures it. It may

I’m not sure about the question you are asking me I have put this frequency in the title and in the message 160 m and 80 m. The error appears across the screen as if it was out of band as it would,

More information needed. Where does it show error? On what frequencies?

Hi, I have just received a ft847 and I have noticed it does not work and shows error as if it was out of band on 160m and 80m. Please can somebody advise.