开云体育

Hello all/or both Many thanks Russ for starting this. James M0GOA/G1WLX

Hi folks, welcome to the ' new ' 847 group, hopefully all the files, photo's and message archive will be transferred as Russ ( N4MAV ) gets them done, please be patient. Leighton. GW3FSP. Group

Good Afternoon Everyone, First let me welcome you to the group.? I will be uploading the files here in the next day or two as I go thru them to get rid of the duplicates. My name is Russ Abbey,

K6EU has moved over.

Hi All, I just uploaded all of the files from the Yahoo group.? Now for the sticky part.? I have to limit the size of files that are uploaded to the board so at present members can view and download

Hi Russ I have moved to .IO, I will need to be designated a Moderator presumably. I might remove some of the files I think I've sent in if they are old ones. Regards Leighton

Many thanks OM. Early afternoon for you. Get your feet up, maybe a nap :-). James

You all ready are Leighton. :) Did it yesterday and uploaded the files also. I have made it so that only you and I for now can upload files to the files section after we make sure they are not

Ok Russ, thanks. Leighton. GW3FSP.

<pre class="tw-data-text tw-text-large tw-ta" data-placeholder="Traduction" dir="ltr" id="tw-target-text" style="text-align:left"><span tabindex="0" lang="en">Hi all, I do not have 12V voltage

Looking at the circuit diagram available here http://www.darkside.cz/~hm/ft-847_service_12.pdf Check voltage at J4003 pin 5. This feeds in to Q4011, that then turns on Q4010, which goes via L4030 to

New to this group. Just purchased an 847. Haven't had a Yaesu in a while & wanted another that I could afford to buy! 73 to All & best wishes for a MXHNY to everyone who celebrates those

Welcome Mike and thanks for passing on your greetings.? Good to have you here and there is enough talent here to answer or research most problems with the FT-847. 73 and Merry Christmas and Happy

Hi Mike I have just replaced my Yaesu 847 with another rig after having owned it since the early 90’s without any problems. It is a venerable rig that’s for sure. I can help to an extent with

Thanks Joe! I've had to downsize here to one small corner of bedroom & the attraction was HF/VHF/UHF in one box! Will keep the group posted on my results when rig arrives from Germany! Just for

Just checked VE3NO and don’t recognize the name. I only moved to Ontario in 2008 from the NWT. I used to have my 847 connected to a microkeyer 2 for the digital modes. A lot easier and Better(?)

HI ALL, I what windows app to manage FT847 memories. I would like to be able to manage above all the FT847 memories and the *SAT memories* with the *SAT TAGs* : 12 are little and I wanted to be able

Hello, Perhaps in catalog of Microham interfaces you find something for you ??? MXHNY 2020 Vy 73 es dx Yvan HB9CSM Provenance?: Courrier pour Windows 10 Envoyé le?:vendredi, 20 décembre

Hi Franco If you are looking to connect a microham microkeyer to the 847, I have a DB39 cable for the FT847 that I am willing to sell, as I am not using my 847 at the moment. The microkeyer is a very

RT Systems has a product ADMS-847 $49.00 US with cable Ruben WA2NBL