开云体育

Here you go Sent: 14 March 2022 10:51 To: [email protected] Subject: Re: [YaesuFT847] USB OK, LSB narrow/pinched TX audio I just checked UHF and it sounds good on USB and terrible on LSB

OK The SSB part and FM Path are completely different, There are two PLL’s for upper and low side band, I suspect you LSB PLL is off frequency or out of lock, they both go off to the Balanced

I just checked UHF and it sounds good on USB and terrible on LSB just like on HF.?Vic? Sent from AT&T Yahoo Mail for iPhone

FB = fine business.?I have not verified, but since it uses the same IF track, I assumed it was the same.? Vic Sent from AT&T Yahoo Mail for iPhone

Hi, What do you mean about FB? Do you have a technical supplement? Is USB and LSB ok on V/UHF? 73 Andrew Sent: 14 March 2022 03:55 To: [email protected] Subject: [YaesuFT847]

Good evening! I have an FT-847 that I have had a good while and only used it on VHF (6 and 2 meters mostly, some satellite). The transmit audio sounds FB on upper sideband, but on lower, (75 meters)

https://1drv.ms/u/s!AsZn9EKP9vrGh5pXuDEs2cARhCsYBA?e=Yim4Hw OmniRig

Hi, this is crackers because all Gmail account are blocking my email and Microsoft are holding it. I will provide a OneDrive link to the file (probably should have done that first off!! De Spence

No problem, remember its for the PSTRotator software but should at least give some bidirectional activity and eliminate cable ot software issues. De Spence M0STO

Spence, please send the file to me and I will upload to the files section in the groups.io. n4mav1@... 73 Russ Abbey, N4MAV Owner Yaesu FT-847 Groups.io

Still nothing. Have you tried putting in in the files area in the group?

I did! Let me try again and check your junk email as it’s got a zip attachment but scanned by Avast as checked and good Sent while portable! please excuse typos.

Send it to my home email direct not the the group opus@...

Hi Mick, the group won’t allow attachments so sent it from another account? Have you received it? Sent while portable! please excuse typos.

Attach the .zip?

Just to follow up. I'm using a standard Null modem cable pins 2 and 3 crossed over and 5 GND. That goes to a Brain Boxes Industrial RS232 to USB. US-25701 and although its a bit of a pig to setup it

Run this zip. Then copy the Folder with the .ini files in it to the OmniRig folder and then select the PST version of FT847.... eg: FT847 or FT847PST. This version was modded for better Bi-Directional

Thanks Spence, I would love to try a different approach to this problem other than the cable/comm/driver changes I have been struggling with. Micky K1XH

Hi Mick, I use PSTRotator and Omni Rig (special Yaesu FT847 .ini file revision). When I change band or mode then Omni rig picks up on the change. Let me send a version of OmniRig that I know works

Greetings All While I am trying to get my 847 setup for digital operations such as FT8, I have come across a CAT control problem. My rig is from 1990, serial 0M45xxxx so it shouldn't have any