Dave, one final thought - there are two Reset procedures and they
do different things.? One is a Microprocessor reset and the other
is a Set Mode reset.? You might try both just in case.? If that
doesn't work you may well have a bad speaker or connection.
Good luck and 73,
Tad Danley, K3TD
On 1/29/2024 11:01 AM, David Fuseler
wrote:
Thanks for the reply.
Bluetooth is disabled.? I get sound thru a speaker plugged into
the earphone jack.? Makes me wonder if there is just a wiring
issue with the speaker.? Otherwise, it seems to work in all
other modes.
I thought resetting the microprocessor would reset to original
settings.
Dave Fuseler
On 1/24/2024 9:08 PM, Chris Robinson
KF6NFW DMR ID 3153250 wrote:
so, the first basic Question, and I hate asking
it, as I believe you are smart enough, but is the BH1 adapter
still in play with the radio? I assume not as you said you
checked headphone/earphone port for dirty connection.
Otherwise, I have seen on very rare occasions that a headphone
port doesnt?make proper contact when the device is returned
back to normal operation, or in this case the bluetooth
adapter removed or other earphone device removed from port.
Sincerely,
?Mr. Chris A. Robinson?
?KF6NFW / WQOQ661
On Wed, Jan 24, 2024 at
5:28?PM David Fuseler <
nj4f@...>
wrote:
I hope some are still watching.
I have a VX-8R that I haven't used in several years. Am
in a wheelchair because of foot surgery, and want to use
the radio.? But I get no audio out.? It seems to work
otherwise.? It transmits, I hear on another radio.? I
tried resetting the radio, which reset everything, but
no help.? I plugged/unplugged a jack in the earphone
jack, thinking it was dirty, no help.? I did have it set
up with a BH-1.? Could that be the problem ? Don't know
how to undo it if it is.
