One more question.? At the bottom right of the screen, next to
the battery charge graph, there is a "S" that blinks.? Can't find
in the manual what it is, or if it is supposed to blink.? Ya'll
know about it ?
Dave Fuseler
On 1/24/2024 9:06 PM, Tad Danley K3TD
wrote:
toggle quoted message
Show quoted text
Hi Dave, I can think of a couple things you might check -
- Is the squelch set too tight?
- There is an Audio Mute feature - is it enabled?? How about
the Squelch S Meter setting?
- Did you perform a full factory reset?? With the radio
powered off - Press and Hold all 3 buttons on the left row
(Band,? HM/RV, TX/PO) while turning the radio on.? Then press
the FW? to reset all settings.? If you haven't used the radio
in several years a full reset might be in order anyway!
Good luck and 73,?
Tad Danley, K3TD
On 1/24/2024 1:46 PM, David Fuseler
wrote:
I hope some are still watching.
I have a VX-8R that I haven't used in several years. Am in a
wheelchair because of foot surgery, and want to use the
radio.? But I get no audio out.? It seems to work otherwise.?
It transmits, I hear on another radio.? I tried resetting the
radio, which reset everything, but no help.? I
plugged/unplugged a jack in the earphone jack, thinking it was
dirty, no help.? I did have it set up with a BH-1.? Could that
be the problem ? Don't know how to undo it if it is.
