Thanks to all who responded. This is funny.? I actually have two
VX-8R radios.? I did do a full reset on the radio in question.?
But still no RX audio. TX audio goes out, I can hear myself on the
other radio.? So I decided to use the other radio.? That radio has
no TX audio out.? It will key the repeater, but no audio.? Both
radios were fine a few years ago.? Haven't done a full reset on
the second radio, but will shortly.? I thought a full reset would
reset all parameters.? Looks like a hardware issue.
Dave Fuseler
On 1/24/2024 9:06 PM, Tad Danley K3TD
wrote:
toggle quoted message
Show quoted text
Hi Dave, I can think of a couple things you might check -
- Is the squelch set too tight?
- There is an Audio Mute feature - is it enabled?? How about
the Squelch S Meter setting?
- Did you perform a full factory reset?? With the radio
powered off - Press and Hold all 3 buttons on the left row
(Band,? HM/RV, TX/PO) while turning the radio on.? Then press
the FW? to reset all settings.? If you haven't used the radio
in several years a full reset might be in order anyway!
Good luck and 73,?
Tad Danley, K3TD
On 1/24/2024 1:46 PM, David Fuseler
wrote:
I hope some are still watching.
I have a VX-8R that I haven't used in several years. Am in a
wheelchair because of foot surgery, and want to use the
radio.? But I get no audio out.? It seems to work otherwise.?
It transmits, I hear on another radio.? I tried resetting the
radio, which reset everything, but no help.? I
plugged/unplugged a jack in the earphone jack, thinking it was
dirty, no help.? I did have it set up with a BH-1.? Could that
be the problem ? Don't know how to undo it if it is.
