开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Yaesu-FT-60
  2. Topics

Battery FNB-83 in Desktop Charger SBH-13

 

Hello everyone.
I have put the battery mentioned in the charger indicated in the title to charge.
But the charging light turns red and intermittently.
It seems to me that this did not happen before, is it normal?
Thank you.
73 de OA4DOS.
 

No, not normal at all. Was the battery hot? They don't charge when over a certain temp. Or it could just be a bad battery; It does happen. Either way a blinking red light on a charger generally means there is a fault that is causing a failure to charge.
73
Alvin KN6ZVI
 

SBH13 will not charge when the battery voltage is too low. I have got to such situation once. If you are 100% the battery you can connect the battery to a lab power supply with suitably set current limit to raise the voltage a bit and then charge in SBH13. Try at your own risk.
 

开云体育

I found that the SBH13 will not work with a 12V supply that is less than 1A. Is yours the original Yaesu plug pack? SAD-16H.
Andrew VK5CV


Get

From: [email protected] <[email protected]> on behalf of Peter OM4AEI <om4aei@...>
Sent: Thursday, May 25, 2023 3:58:44 PM
To: [email protected] <[email protected]>
Subject: Re: [Yaesu-FT-60] Battery FNB-83 in Desktop Charger SBH-13
?
SBH13 will not charge when the battery voltage is too low. I have got to such situation once. If you are 100% the battery you can connect the battery to a lab power supply with suitably set current limit to raise the voltage a bit and then charge in SBH13. Try at your own risk.

1 - 4 of 4