开云体育

Look at the "S" meter when you push the PTT, like someone else said. Your battery may not be able to take the load of transmit. I had the same problem and found that I had burned up my OEM battery

When I start up the radio, it shows 7.4 volts. Don't I have to wait until the low battery symbol comes on before recharging, to avoid damaging the battery? Judy

Does the display blank out when you hit the PTT? If so, your battery needs charging. When you turn on the radio, it should display around 8.4 volts. Do NOT have it on any chargers when you do

What is your battery voltage? Do you have any other chargers or cables connected to the FT-60 when you are trying to transmit? Pressing PTT and having the radio reboot (the three tone startup

Hoping for advice. I can program the radio for repeaters, and yes set the tone as needed. I hear everyone else just fine. But when I push PTT, I get the 3-tone startup sound and no one hears me. All

There is also a workaround to permanently disable the "beep." I believe there is a how-to somewhere in the Files section. Or you can go here:

And check out the files section of the group to find instructions for permanently disabling WIRES. Otherwise this will keep happening. 73 de AC7EW Kelly Sent: Friday, April 14, 2017 19:44 To:

You have activated the WIRES function. Look for the 'atom' symbol on the keyboard and hit that key to make it disappear. You may have to press and hold the key for a couple seconds. Look it up in

WIRES is on. If so, there is a small atom symbol in the upper right corner of the display. To turn it off, momentarily touch the 0 key. ?Sent from BlueMail ?

--------------------------------------------

Am new owner of FT-60. When key transmitter there is a beep before transmission can be heard by others. Is this normal or is there a way to disable beep? John, K4QQ

Same thing

In my opinion, 2000mAh Lithium is pretty lame when compared to the radio's default capacity. I decided to build one myself after realizing how much it was going to cost me to convert to Vertex's

In my opinion, 2000mAh is pretty lame when compared to other radio's default Li capacity. For example, a $10 Baofeng claims to have a 1500mAh battery(real capacity is 1000mAh or less). I decided to

I looked and it said for a Vertex FT-60. Will that work well in the Yaesu Ft-60? (Just want to make sure...) Kerby N8FLK On Thu, 6 Apr 2017 14:03:47 -0700 "'Garry Kraemer' ggkraemer@...

Try Batteries America..

I need one for us version. So far the ones from amazon take a couple charge cycles and die. Im driving really fast and the cops are right behind me! So excuse any typos please.

Goto http://www.vertex-standard-emea.com/fnbv67li.html and click the Where to Buy button on the right. 73, Jim K5JG

kbibis, EBay has Vertex LiPo batterys listed: Battery Li-Ion for VERTEX FT60 FT-60R VX246 VX420 VX410 VXA170 VXA200 VXA210A Garry Sent: Thursday, April 06, 2017 12:55 AM To:

Hello, I'm trying to locate a Lithium battery for the FT-60 (and FT-270). Is the FNB-v67Li discontinued ? Most ham radio shops don't carry it. Are you aware of any online shops in Europe where i