开云体育

That did it. I think I finally understand base memory, memory banks, skip mode and scan mode. Skip K4IXO

Check that you have got the SCN MD (set menu item 43) set to MEM. If it's? set to ONLY,? the scan routine will only scan any memory channels that you have marked as ONLY (which presumably non of

I am having problems getting my FT-60 to scan. I know that scanning has worked on it before, and, don't know if I have set some deeply hidden parameter of something - but - now I'm having problems.?

I bought 2 replacement keypads for my 60 from Yaesu. They were cheap. Www.Yaesu.com. Jardy Dawson WA7JRD Message sent by....Oh look!! Pretty lights!!

OM Clint - does Yaesu have a website to order example a new rubber keypad or do you need to call them on the phone? de Wb8yqj Don Carlsbad, Ca. USA

Those seem to come off rather often and easily. Jardy Dawson WA7JRD Message sent by....Oh look!! Pretty lights!!

I have left voicemail and sent a message to Yaesu Parts ... If not available through them, I will gently remove one of mine and send it to you. -- Clint Bradford K6LCS http//www.work-sat.com

Apparently, the rubber cover over the MIC/SP & EXT DC on my Yaesu FT-60 been missed placed or lost. Can anyone share with me a place that I can obtain a new cover? Thank you for your time!

I use to the FT-60 at home with a rooftop vertical. The coax is low loss and rather large diameter. Instead of connecting the big coax to the FT-60 I use a 3 foot length of RG-316 with an SMA

Alright, that makes sense. Thanks. I was just trying to add one component to the line instead of what is basically three.

Yes - they are made. No - you shouldn’t do it. That adapter and that heavy coax will place a lot or stress/strain on your HT’s delicate center conductor of the antenna receptacle ... Use a

You need something like this: https://www.waveform.com/products/rsrf-sma-male-to-n-female-adapter?utm_medium=cpc 73 de AC7EW Kelly Sent: Wednesday, 20 January, 2021 13:09 To:

Sorry, this is a pretty basic question but I just don't have one around to test it... I'm wondering if an SMA to N adapter would fit directly on the FT-60. Just going by the measurements it looks

Yes, you are correct. I should have been more specific when speaking about emergencies. RandyN4QWK

I do not believe there is a similar statement available under Part 90 or Part 95 rules. Jardy Dawson WA7JRD Message sent by....Oh look!! Pretty lights!!

I believe that usage during an emergency is restricted: only during emergencies when an imminent danger to a human life. It is not legal to use ANY radio in an emergency unless danger to human

Yes, Narrow Band is an available option.? No mod needed.? See programming software and/or the owners' manual.? Set mode 55. 73 Bob K2GHY

I think the point is that while any radio can be used in an emergency some radios use different protocols, frequencies, etc that not all radios are capable of employing and therefore no one would hear

During an emergency, ANY radio can be used for communications. Randy UrickN4QWK

We weren’t talking about part 95 (GMRS, FRS, MURS, CB), only public safety and commercial. I do agree neither ham radios or public safety radios can be used on Part 95. Because Part 95 radios are