开云体育

Thanks for the correction! Rick ***

That's not really how the radio works. The big current draw item is the power transmit section. If there is enough juice in the battery to transmit, then there is enough juice to modulate. RandyN4QWK

Also, set power to “HIGH” if it isn’t already - press FW, then 3, and turn the dial until HIGH appears. Rick KK6WHJ ***

One simple thing to check is whether the FT-60 battery is charged. If the battery is down, you might be able to transmit enough signal to pop squelch on the repeater, and certainly be received on a

I just went thru this same drill when our club implemented a PL tone after moving our repeater to a higher location. Everything checks out but no voice heard, just a carrier. Assuming you’ve

Dora, If other repeaters act the same way, I would do a Factory Reset. You will lose all data you input but also eliminate the possibility that the software was corrupted. I’ve found that illogical

Thank you Randy. I will try other repeaters. Dora

Heck to see if you have the WIRES function active. Look for what looks like a Atom symbol on the screen. If it is active, the radio would put out an audible tone at first and cut off the first part

If you were scanning for PL tones on page 24 then you need to change the tone from tsq back to tone.

I checked the listing directly on the FCC License Check Website. It is listed as issued in 2015 Dora, did you mistype your call sign? If not I would suggest the VEC team at the organization

She might be hitting the repeater but might be too noisy to hear. Too far away but able to key it. Listen to the repeater output with the scanner

Dora,Oddly I get your call assigned to a different name on QRZ.And it is still active.Curious minds want to know. Rudi wa2nub

It sounds like she's getting into the machine. Others say they can hear the machine key up but not her voice. At first I thought it might be mic gain or something simple like that but since she can

Congrats on getting your license Dora! That is very odd - clearly you're getting out. I agree with Randy, try other repeaters and try simplex. Do you belong to a local club, or know of any local hams

Look up a repeater directory app on your phone, tablet or computer and check the input tones. Some repeaters require one. 73,John N4SME

Dora - That's a good one. You hear yourself on the scanner, so that means that you are modulating. You can kerchunk the repeater, so that means the PL tone and frequency is good. Nobody can hear you,

I just got my tech license recently, and purchased a Yaesu FT-60R portable radio. I read and followed the instructions thoroughly with respect to locating active repeater frequencies in the 2M/70cm

thanks.

Page 25 in the FT-60 manual. Look for “Split Tone Operation.” Rick KK6WHJ

Hi folks. Apologies in advance for what is probably an odd question. Can I program a memory channel to transmit with a particular CTCSS, but look for DCS on receive? I'm thinking this might be a