开云体育

I've had intermittent success and failure with Winlink Packet.? Seems to be that the Sound settings in Windows is the last, and most delicate factor.? I would appreciate a copy of somebody's

Not a problem, sir!? I appreciate your trying to help in the first place. By the way, I can confirm that the following 2.5mm male-to-male TRS cable indeed works perfectly for cloning FT-65Rs. $8.29

M y source was a respected amateur radio dealer ... and I was wrong. I sincerely apologize! It is, indeed, 2.5mm. -- Clint Bradford K6LCS http//www.work-sat.com

I did a little more research and it's apparently a 2.5mm (not a 3.5mm) TRS cable between the microphone jacks on each radio.

Ah gotcha, so just straight-through connections from end to end.? T to T, R to R, S to S.? Thanks!

Does anyone have a wiring diagram for Yaesu's SCU-36 cloning cable?? Asking for my FT-65R HT. Thanks in advance and 73, Dan WX1P

Randolph, Glad to be of service. Rick KG7MQL

Hello Rick - I just joined this group and I see that you're a member. Glad that I can personally THANK YOU for your FT-60 "translation" of the OEM manual. Your effort has really helped me and another

As Clint points out, you may have the Deviation set to "Narrow" +/-2.5KHz instead of the default "Wide" +/-5KHz. See manual page 62. The other possibility is the FT-60R Mic socket itself. It is

The rubber bands they (used to?) have on broccoli work well and last. FWIW: I understand the issue isn't that something is broken in the FT-60 but rather that the round portion of the connector you

Page 62-ish of our manuals. -- Clint Bradford K6LCS http//www.work-sat.com

Let's simplify this. If purchased new from an authorized Heil and Yaesu dealer, that Heil mini-boom single-sided headset work great. There is no widespread problem with that combination of items. SO

Well...Heil's website is awful.? I don't think "Dynamic" refers to the microphone element type.? When you click on it it takes you to a review page.If you click on "specs" it says...73,Gary K9GS

I have followed this process with success to improve transmit audio. ?https://youtu.be/R3Ovv5_TVNg?si=ZYNq_RZvCvk_aoT0

A nice stout elastic band?

I have several headsets/speaker mics to use with my FT-60Rs. The audio on all of them seems fine. My problem is with the plug. It seems the slightest jostling and the plug comes out just a little

Well an electret microphone element must have DC bias to function. On the product page at the Heil site, I see four links: DESCRIPTION DYNAMIC IC SPECS Given that Dynamic and IC are

Well an electret microphone element must have DC bias to function.?Maybe the Yaesu version of this headset uses a dynamic element?? I tried but failed to find an owners manual on the Heil

Does anyone have a suggestion for adjusting mic gain on the FT-60? I need to increase it to use a Heil HTHY headset. As I said in my other reply, make sure you are talking into eather end of the

Does the FT60 supply DC bias for the microphone element or is there a battery holder in the headset? NEITHER. Icom is the brand usually supplying voltage to an electret element.