开云体育

I had similar problems when I first tried to use FT-60 Commander. The solution was to go on the transfer menu and select the Alternate Write Method. +++++ Jerry KG7NOR +++++ Live simple, love well,

If your cable shows to be a Prolific, roll your driver back to 3.2.0.0. You can find this at www.miklor.com. Make sure you use the same USB port each time. Jardy Dawson WA7JRD Sent from the Death Star

I downloaded the FT-60 commander Software and I have the cable for the FT-60 radio but I get an error no matter what port I try using. I'm running windows 10 but I wouldn't think that would have any

When I got the FT-60R, my first radio, someone told me about FT-60 Commander. I've been using that piece of software now for nearly 2 years. It works fine, but does have one oddity. Occasionally, it

Hi Chris, I bought a cable from here Ham Goodies http://www.hamgoodies.co.uk/. I had a few issues initially, but that was more to do with Chirp than the cable My FT60 is now programmed with plenty of

Hi Chris, I was just looking at one of these on ebay. I have one somewhere but looks to have been lost in my many moves... The one on ebay is most certainly a knock-off but you should be okay if you

went on E bay and did a search for FT 60 cables and this is what I found. I have bought a number of cables from this seller and never had a problem

hi group am a newbie to the group and to the ft60 am looking for the cable to operate the chirp program there quiet expensive here in the UK, does anyone have one spare or is selling one and willing

The eneloops in the FBA-25s worked in both the old radio and new one. However, the new radio is very tight with the eneloops and only tight with the alkalines. The old radio is comfortable with

Poswerswerx/Maha 2500 and 2700 mAH AA NiMH cells fit perfectly in every FBA-25 I own - from 2004 to last month's models of FBA-25 packs. Make sure you feel the "click as you press in the positive tip

I use eneloops at work for wireless mice and keyboards. Sounds like it’s worth taking both radios with the AA packs into work and trying them out. Buying three chargers with 4 batteries each would

That why you see the previous post only uses the 2000 mah instead of the 2500's. The get the higher capacity by making the battery bigger not by using better internals.

I have the same problem (battery case can't be clipped to the radio) with two battery cases using Eneloop batteries. +++++ Jerry +++++ Live simple, love well, and take time to smell the flowers along

Problem I have is the AA battery case for my New FT60 will not close when good hi cap AA's are in it - only alkalines - the NiMh are just a little too big. I have Powerex 2500 Mah cells. -- KQ?J

I don't buy replacements for stock 1400mAh battery on my older FT-60 (circa 2007). I have a AA case and use Eneloops religiously. The only time the stock battery is used is while the Eneloops are

Thursday, 23 Jun at 22:22 EDT - It all arrived this afternoon. As several here suggested, the radio is made in Japan and the batteries in China. The only difference I notice is the new radio stands up

That is technically correct but that being said, I would get three years and more out of a set of cheap nimh cells from walmart that had more capacity then the stock battery pack. I would hook it up

When she first won that radio, my wife was using the wall wart charger that came with it plugged into the side of the radio. At some point, and I can't remember when, I bought her a second battery and

In all honesty, pumping unregulated constant current into a NiMH cells - like what was shipped with the FT-60R until 2013 - is NOT the best way to charge those packs. The intelligent charger that now

Lovely. +++++ Jerry KG7NOR +++++ Live simple, love well, and take time to smell the flowers along the way. ~ Mark Twain